Installers need batteries that fit the system, arrive as specified and don’t generate callbacks. LJY Energy’s LiFePO₄ batteries come in standard 12V, 24V and 48V-class configurations for solar and off-grid system designs; inverter compatibility is confirmed per project against the inverter model and BMS rating.
Compatibility is confirmed per inverter model and firmware, because the battery–inverter link depends on the protocol profile, cable pinout and BMS settings. LJY Energy does not publish a list of compatible inverters; step 3 of the installer path below shows what is checked and how to test a sample.
Built for Installation Work
- System compatibility — Standard 12V, 24V and 48V-class voltages; fit with your inverter or charge controller is confirmed per project against its model and BMS rating.
- Clear technical specifications — Know exactly what you’re installing; detailed specifications provided for each model. Browse products →
- Application coverage — Solar energy storage, RV, marine, backup power and off-grid systems. View solutions →
- Project configuration — Need a specific setup for a job? We configure batteries to project requirements. OEM & ODM options →
Installer path: from system design to inquiry
Storage jobs usually go wrong in one of three places: the battery does not communicate with the inverter, the format does not fit the site, or the destination market asks for documents nobody planned. The steps below follow the order in which installers decide, and each step links to the page that answers it.
- Choose the starting size. The entry capacity is 51.2V (48V class) 100Ah, 16S, which is 51.2V × 100Ah = 5,120Wh: 51.2V 100Ah LiFePO4 battery. Upsizes have their own pages: 200Ah (10,240Wh), 280Ah (14,336Wh) and the 314Ah floor-standing cabinet (16,076.8Wh). The 51.2V rack series page compares the ladder.
- Choose the format. Wall-mounted 100Ah, outdoor IP65-class wall-mounted, rack-mount, stackable home storage: all of these are low-voltage 51.2V (48V class) batteries for 48V-class inverters. High-voltage projects are a separate series, the high-voltage stackable module (modules in series, stacks of 204.8V and up), which needs an HV inverter and cannot be connected to a 48V-class inverter.
- Confirm the inverter link before you quote. Read the closed-loop inverter communication guide and run your numbers through the inverter battery compatibility calculator.
- Size the system. Use the solar battery sizing calculator; the configuration guide by application shows what is standard and what you can choose.
- Agree warranty and after-sales terms. The warranty terms guide lists the clauses to settle before the first order.
- Check the destination rules. See the import guides below, then send the inquiry.
51.2V (48V class) at a glance for installers
Model-defining values are arithmetic from voltage and capacity, not lab-measured results. Everything marked as confirmed per project is settled in the quotation for your format and inverter.
| Group | Parameter | Value | Status |
|---|---|---|---|
| Electrical | Voltage class and cells | 51.2V (48V class), 16S LiFePO4 | [Industry reference] |
| Electrical | Energy by capacity (51.2V × Ah) | 100Ah = 5,120Wh · 200Ah = 10,240Wh · 280Ah = 14,336Wh · 314Ah = 16,076.8Wh | [Industry reference] — arithmetic |
| Electrical | Alternative voltage class | A 15S 48.0V configuration (4.8kWh at 100Ah) is listed as an ODM option on the wall-mounted 100Ah page | [Optional configuration] |
| Electrical | Continuous and peak current, cut-off voltages | Depend on the BMS option and the format | [Confirmed per project] |
| Format | Mounting formats that have a page | Low-voltage 51.2V formats: wall-mounted · outdoor IP65-class wall-mounted · rack · stackable (parallel) · floor-standing cabinet. High-voltage stackable modules are a separate series (stack voltage 204.8V and up) with their own page | [Optional configuration] |
| Format | Dimensions, weight, IP rating, terminals | Differ by format and are set per project | [Confirmed per project] |
| Communication | Inverter link | CAN or RS485; protocol profile, cable pinout and address method set per inverter model and firmware | [Optional configuration] · [Confirmed per project] |
| Communication | Compatible-inverter list | None published. Compatibility is stated only for a combination that has a test record | [Confirmed per project] |
| Parallel | Batteries per system | No fixed maximum is published; the limit depends on the BMS and the inverter | [Confirmed per project] |
| Thermal | Self-heating for cold sites | Available on request | [Optional configuration] |
| Documents | Certificates and test documents | For the exact model and destination market; UN38.3 and MSDS documents coordinated per order | [Confirmed per project] |
| Commercial | Price, MOQ, lead time, stock, warranty | Stated in the quotation | [Confirmed per project] |
What to confirm before you order
- Inverter brand, model and firmware version, and the lithium battery profile you will select on it.
- Inverter communication port type (RJ45 or terminal block; CAN or RS485).
- Number of batteries in parallel now, and whether the system will be expanded later.
- Installation type and climate: indoor wall, outdoor wall (IP65-class), rack or floor cabinet; minimum and maximum ambient temperature (decides whether self-heating is needed).
- Voltage class: low-voltage 51.2V in parallel, or a high-voltage stack (stack voltage comes from the module count, for example 4 modules = 204.8V, and is matched to the HV control box and the inverter voltage window per project).
- Destination country and the documents your customs broker will ask for.
- Logo, colour and label needs. Appearance, color and logo customizable per customer request.
Import rules by destination
These guides describe the official requirements and the questions to put to your customs broker. The Africa guide labels each country row verified, partly verified or not verified, with a date. None of the guides is a statement that LJY Energy holds any certificate.
- Africa: Nigeria, Kenya, South Africa and Ghana — low-voltage storage import checklist with a verification status and date per country.
- Saudi Arabia and UAE — SABER (SASO) and ECAS (MoIAT) buyer checklist.
- Pakistan — 2026 customs valuation, duty concessions and PSQCA scope.
For a first estimate of duties and freight, use the battery landed cost calculator.
Repeat projects and your own brand
Installers who deploy the same system again need the same confirmed specification on every order. The wholesale and distributor program explains how repeat supply is handled, and the OEM and ODM options linked above list what you can choose, such as protocol profile, logo and packaging. How specifications are confirmed and checked is described on the About Us page.
New to the Battery Business? Start Small. Grow Together.
Adding battery storage to your installation work for the first time? We welcome inquiries from first-time battery resellers and growing businesses. Sample and small-batch sourcing options depend on the product, configuration, and supplier availability.
Send an installer inquiry
Include as many of these as you have; approximate figures are fine.
- Inverter brand, model, firmware and communication port
- Target capacity and number of batteries per system
- Format and site (indoor or outdoor, climate)
- Destination country and expected annual volume per SKU
- Branding needs
Start from the format you need: 51.2V 100Ah wall-mounted · outdoor IP65-class wall-mounted · high-voltage (HV) stackable module, not 48V class · 314Ah floor-standing cabinet · inverter communication question. Browse everything in the product catalog, or see the solar energy storage and home energy storage application pages.
WhatsApp: +1 404 784 1946 (primary), +86 159 8945 0735 (backup). Email: jack@ljyenergy.com. You can also use the contact form.
The WhatsApp and email links open a short message that already names this page and asks for the product, quantity, destination country and business stage. Fill in what you know and leave the rest.