Rack Battery UPS Communication Protocols

An IT integrator is replacing the lead-acid strings in a server-room UPS with 51.2 V LiFePO4 rack modules. The modules fit the rack and the voltage matches, but the job is not done: the battery and the UPS have to talk to each other. If the UPS cannot read the battery state of charge and alarms, it cannot warn the servers before shutdown, and if the battery cannot follow the UPS shutdown command, the bank may keep feeding a load that should already be off. Rack modules are modular: a bank can start small and grow as the load grows, adding modules in parallel instead of replacing the bank, and each added module joins the same communication bus, so the addressing and protocol setup has to scale with the bank. This page is the checklist for that handshake: which communication links a rack battery and a UPS normally use, what each one is for, and what to confirm before ordering. It is a checklist, not a protocol tutorial, and every protocol profile is confirmed in writing for the specific UPS model before an order.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We supply 51.2 V 19-inch rack battery modules only, not UPS units, racks or PDUs. This page lists the standard communication interfaces found on rack battery BMS units and UPS systems. It does not describe any manufacturer’s proprietary protocol in detail: the exact protocol profile, baud rate and register map for a given UPS model are confirmed in writing before an order.

Rack battery modules and UPS in a server rack
Photo: Jemimus, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustrative image, not an LJY product.

Rack battery to UPS communication checklist

RS485 (Modbus RTU)2-wire · 1200 m · 32 nodes
CAN bus (CANopen / J1939)2-wire · 40 m · 1 Mbps
Modbus TCP (Ethernet)Ethernet · RJ45 · 100 m
SNMP (network monitoring)Ethernet · RJ45 · v1 / v2c / v3
Dry contact (relay)Relay · NO / NC
RS232 (point-to-point)1:1 · 15 m
Ethernet port (RJ45)RJ45 · 100 m · 10 / 100 Mbps
USB service portType-B · 5 m
Parallel CAN (master-slave)Master-slave · 16 modules

Sources: the battery BMS datasheet and the UPS operation manual for the specific models in the order; protocol profiles are confirmed in writing before shipment. See also LJY 51.2V rack module page.

Worked example

Example, assuming a 5 kW rack row with 2 51.2 V modules and a UPS that accepts CAN and Modbus RTU: confirm three links before ordering — CAN at 250 kbps for live battery data, RS485 at 9600 baud for the Modbus register map, and 2 dry contacts for on-battery and low-battery signals. The bank can start with 2 modules and grow later: each added module joins the same CAN bus with its own address, so confirm the master-slave addressing and protocol compatibility for the larger bank at the first order, not after the expansion. Confirm the protocol profile, the baud rate and the contact list in writing; a matching RJ45 connector does not mean a matching protocol.

What to send before a proposal

  • UPS make, model and firmware version, plus the protocol profile it accepts (CANopen, J1939 or proprietary)
  • CAN baud rate, node address and bus termination for the battery bank
  • RS485 baud rate, node address and the Modbus register map version
  • Dry-contact list: which signals the UPS needs (on-battery, low-battery, shutdown) and NO/NC type
  • Cable and pinout: RJ45 pin assignment and cable length between battery and UPS
  • Expansion plan: how many modules the bank may grow to, and whether the master-slave addressing and protocol profile cover the larger bank

Request a protocol check

Send the UPS model, the protocol profile it accepts and the signals your setup needs. LJY Energy will confirm the matching BMS communication setup and the checklist items above in writing, then quote the rack modules with delivery terms. We coordinate OEM/ODM battery supply from Shenzhen; we are not a factory, and every order is confirmed in writing before production.

Rack battery communication ports for UPS connection
Photo: Robert.Harker, Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustrative image, not an LJY product.

Request a UPS protocol check · WhatsApp +86 159 8945 0735