In Mbabane and Manzini, solar installers are asked to add storage to houses and shops on a 230 V 50 Hz grid that can dip when the regional interconnect is tight. Anyone searching for LiFePO4 storage for solar installers in Eswatini needs a 51.2V module whose charge window and CAN or RS485 port are confirmed on the actual inverter model and firmware — not a compatibility verdict inferred from a voltage name. This page is about that first roof and the SKU that follows it. It is not an installation manual and it is not a list of approved inverters.
LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory and we do not install in Eswatini. We coordinate 51.2V wall-mounted and rack modules. The charge window and the communication port are confirmed per inverter model and firmware. We do not publish a compatibility verdict.

Request an Eswatini installer quotation · WhatsApp +86 159 8945 0735
What the installer defines per roof
| Point | Why it matters | Confirmed per project |
|---|---|---|
| 51.2V wall-mounted | many houses and shops | kWh and wall space |
| 51.2V rack | plant rooms or several modules | module count and cabinet space |
| Inverter protocol | CAN or RS485, and the charge window | confirmed per inverter model and firmware |
| Daily energy | how much the house or shop actually uses | measured kWh or watts × hours |
| Installation | not part of the supply | LJY does not install on site |
A 51.2V name is not an approval of any inverter. The installer confirms the window and the intended port on the first Mbabane or Manzini roof, then freezes that SKU for later jobs.
What the installer sends before a proposal
- Inverter model and firmware version.
- Whether the cable is intended for CAN or for RS485.
- Measured daily kWh, or watts and hours, of the house or shop.
- Wall or cabinet space for the module.
- How many roofs are expected to share the same SKU after the first job.
Prove one roof, then repeat the SKU
Installers who record the protocol on a first Mbabane or Manzini roof, and then freeze the module, can put the same SKU on later houses and shops without guessing. Prices and lead times only in a quotation.

Request an installer quotation
Send the inverter model, the firmware and the measured daily kWh. We reply with the points still to be confirmed, not with a verdict.
Send the inverter model and firmware
LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.
