LiFePO4 batteries for dairy milking parlors in Ireland

On grass-based dairy farms in Munster — Cork, Limerick and Tipperary — a milking cannot stop mid-session when the grid drops in a storm. The vacuum pump, the milk tank or plate cooler and the parlor lights or controllers have to keep running, because co-ops still expect the milk to be cooled. Many farms leave a diesel genset running for every short cut, or they lose vacuum and cooling together. Anyone searching for a LiFePO4 dairy milking parlor battery in Ireland needs to turn the measured watts of the pump, the cooler and the lights, and the typical milking or outage hours, into kWh — not copy the parlor’s installed kW nameplate or a neighbour’s ampere-hour figure. This page is about the bank behind the parlor. It is not a poultry-house ventilation page, it is not a solar cold-room page, and it is not a generic shop or clinic backup page.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory, we do not make parlors, vacuum pumps, milk tanks or plate coolers, and we do not run farms. We coordinate 25.6V and 51.2V banks, with a heated option where winter charging may fall below 0 °C. An existing genset, if the farm already has one, stays for longer outages; starter or genset batteries stay separate. Wash-down, humidity and enclosure are confirmed per parlor. We do not publish guaranteed milk-quality, collection or uptime claims.

Pasture and cattle troughs near Killeen in County Cork, used to illustrate milking-parlor battery banks in Munster.
Photo: David Hawgood, Wikimedia Commons, CC BY-SA 2.0 (resized, WebP). Illustration, not an LJY product.

Request an Irish dairy-parlor quotation · WhatsApp +86 159 8945 0735

What the farm defines per parlor

PointWhy it mattersConfirmed per project
51.2V wall-mountedvacuum pump plus cooler and parlor lightskWh and module count
51.2V racklarger parlors or a plant roommodule count and cabinet space
25.6Vsmaller parlors on a 24V classampere-hours and cabinet space
Milking or outage hourshow long the essential load must runhours recorded on that parlor
Parlors, pumps, tanks and farm operationnot part of the kWh supplyLJY does not supply them

The arithmetic is only a method: a vacuum pump at a measured average of 2.2 kW, plus 1.5 kW for the milk cooler and 0.3 kW for parlor lights and controllers, for three hours, asks for about 12 kWh, plus losses and a reserve. A week of measured watts on that Munster parlor is worth more than the parlor’s installed kW or a copied ampere-hour label. Charging below 0 °C is only with heating.

What the operator sends before a proposal

  • Measured average watts of the vacuum pump, the milk tank or plate cooler and the parlor lights or controllers, not only the parlor’s installed kW.
  • Typical milking session hours, and storm-outage hours, on that Munster parlor.
  • System voltage and the space in a plant room or an outdoor cabinet.
  • Whether a genset stays for longer outages, and whether winter charging may fall below 0 °C.
  • Wash-down and humidity around the parlor.

Prove one parlor, then repeat the bank

Operators who record the measured watts and the milking hours on a first Munster parlor, and then freeze that bank, can put the same design on later parlors without guessing. Prices and lead times only in a quotation.

A streetscape in Limerick, used to illustrate co-op dairy country where parlor backup is specified in kWh.
Photo: Sharon Hahn Darlin, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a parlor-bank quotation

Send the measured watts, the milking or outage hours and whether winter charging may fall below 0 °C. We reply with a written offer, not with a milk-quality or uptime guarantee.

Send the measured watts and hours

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.