Electric rickshaw and loader battery packs in Pakistan

Electric rickshaws and small cargo loaders now work the streets of Lahore, Karachi and Faisalabad, often through a long summer when parked vehicles sit in the sun. Imported kits arrive with nameplates of 48V, 60V or 72V; any 60V or 72V supply is confirmed per project. A fleet looking for an electric rickshaw battery pack in Pakistan has to match the pack to the charger, the controller and the heat, not to the name.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory. Our three-wheeler pages describe a 48V-class pack as 51.2V with 16 cells in series, charged at 58.4V, and say lead-acid chargers are not suitable. Any 60V or 72V pack is confirmed per project, because series count, charge cut-off and BMS must fit the controller of that rickshaw or loader.

A dense row of auto-rickshaws in a Pakistani city
Photo: Farhan from Karachi, Pakistan, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a quote for a Pakistani rickshaw pack · WhatsApp +86 159 8945 0735

What to check on the vehicle

ItemWhy it mattersConfirmed per project
Present chemistrylead-acid, NMC or LiFePO4 change the charge voltagedatasheet of the old pack
Chargermust stop at the new pack’s charge voltagemodel and charge profile
Controllerhigh and low voltage cut-offsvalues from the maker
Summer heatcharge inhibit and ventilationparking place and enclosure
48V 100Ah three-wheeler pack51.2V 16S referencecapacity per route

LiFePO4 should not be charged below 0 °C; in Pakistan the more common limit is high cell temperature in summer, so charge current and ventilation are confirmed per project.

Nominal voltage, charge cut-off, series count and BMS

A 48V, 60V or 72V nameplate (60V and 72V supply confirmed per project) does not say how many cells are in series or where the charger must stop. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from Battery University charge limits. Every 60V or 72V pack is confirmed per project.

Chemistry and seriesNominalCharge cut-offBMS configuration
LiFePO4 16S (3.2V / 3.65V per cell)51.2V58.4V16S board
LiFePO4 20S64.0V73.0V20S board
LiFePO4 24S76.8V87.6V24S board
NMC 16S (3.6V / 4.2V per cell)57.6V67.2V16S board, NMC limits
NMC 20S72.0V84.0V20S board, NMC limits
Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell)60V69.0–73.5Vno BMS; LiFePO4 replacement confirmed per project
Lead-acid 72V (6 × 12V, 36 cells)72V82.8–88.2Vno BMS; LiFePO4 replacement confirmed per project

A 60V lead-acid set charges up to about 73.5V, while a 20S LiFePO4 pack stops at 73.0V, so 60V supply is confirmed per project and charger, controller and BMS are checked together. A 16S BMS cannot protect a 20S pack. We never infer compatibility from a voltage name.

What fleets send before a quote

  • Photo of the vehicle nameplate and the present pack label.
  • Controller model and its cut-off voltages.
  • Charger model and whether it can be reprogrammed.
  • Daily distance, cargo and where the vehicle parks in summer.
  • UN38.3 and SDS for the chosen pack come with the quote; import stays with the importer.

Pilot through a hot month

Fleets that run a pack on a few rickshaws through a Lahore or Karachi summer month, then fix one specification, avoid mixing chargers and seeing packs overheat. Prices and lead times only in a quotation.

A busy bazaar street in the walled city of Lahore
Photo: Guilhem Vellut from Annecy, France, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Vehicle, controller and charger data → series count and pack proposal → pilot vehicles → fleet orders. Prices and lead times only in the formal quote.

Send your vehicle details and request a pack proposal

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.