Electric boda battery swap packs for Kenyan networks

Electric boda-boda fleets in Nairobi, Kisumu and Mombasa are starting to use swap cabinets so a rider changes the pack in a minute instead of waiting to charge. The network only works if every pack fits every cabinet and every approved vehicle. An operator searching for an electric boda battery swap pack in Kenya has to specify more than the voltage written on a nameplate.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we do not build cabinets or run a swap network. A 48V-class pack is described on our three-wheeler pages as 51.2V with 16 cells in series, charged at 58.4V. Any 60V or 72V pack is confirmed per project, because series count, charge cut-off, connector and the BMS protocol toward the cabinet must be the same across the Kenyan network.

Night traffic on the Thika Superhighway in Nairobi, where commuter boda routes run
Photo: Andrew Atina, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a quote for a boda swap pack · WhatsApp +86 159 8945 0735

What a swap specification has to lock in

ItemWhy it matters in a networkConfirmed per project
Series count and charge cut-offthe cabinet charger must stop at the pack’s voltage16S, 20S or another count, in writing
Connector and mechanical sizepacks must drop into every cabinet and every vehicle traydrawing and sample
BMS to cabinetthe cabinet needs state of charge, temperature and charge limitsprotocol and pinout
Daily swap countcycle life and charge current of the cabinetlogged swaps on a pilot route
48V 100Ah three-wheeler pack51.2V 16S referencecapacity per shift

A lead-acid charger, or a cabinet set for a different series count, is not acceptable on a LiFePO4 swap pack; the cabinet profile is part of the specification.

Nominal voltage, charge cut-off, series count and BMS

A 48V, 60V or 72V nameplate (60V and 72V supply confirmed per project) does not say how many cells are in series or where a cabinet charger must stop. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from Battery University charge limits. Every 60V or 72V pack is confirmed per project.

Chemistry and seriesNominalCharge cut-offBMS configuration
LiFePO4 16S (3.2V / 3.65V per cell)51.2V58.4V16S board
LiFePO4 20S64.0V73.0V20S board
LiFePO4 24S76.8V87.6V24S board
NMC 16S (3.6V / 4.2V per cell)57.6V67.2V16S board, NMC limits
NMC 20S72.0V84.0V20S board, NMC limits
Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell)60V69.0–73.5Vno BMS; LiFePO4 replacement confirmed per project
Lead-acid 72V (6 × 12V, 36 cells)72V82.8–88.2Vno BMS; LiFePO4 replacement confirmed per project

A 60V lead-acid set charges up to about 73.5V, while a 20S LiFePO4 pack stops at 73.0V, so 60V supply is confirmed per project and the cabinet charger is set to the pack, not the name. A 16S BMS cannot protect a 20S pack. We never infer compatibility from a voltage name.

What the operator sends before a quote

  • Vehicle models that will share the pack, and their controller cut-offs.
  • Cabinet charger model, communication protocol and connector.
  • Mechanical envelope of the pack and of the cabinet slot.
  • Expected swaps per pack per day, and number of cabinets in the first city.
  • UN38.3 and SDS for the chosen pack come with the quote; import stays with the importer.

Pilot one corridor first

Operators who run one pack specification on a handful of cabinets along one Nairobi corridor, then freeze the drawing, can open the next cabinets without mixing connectors and chargers. Prices and lead times only in a quotation.

An electric-vehicle battery swap cabinet, shown as an example of the cabinet type, not a product we supply
Photo: Lyg 2001, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Vehicle, cabinet and connector data → pack specification → pilot corridor → network orders. Prices and lead times only in the formal quote.

Send your cabinet and vehicle data and request a pack specification

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.