A container of 19-inch rack battery modules is ready at the factory, but the sailing is missed because one document does not match the cargo: a packing list that counts modules differently from the pallet labels, or a safety data sheet (SDS, also called MSDS) written for cells instead of the finished modules. For an importer, the documents are part of the shipment, not paperwork after it. This page lists the import documents a sea-freight shipment of standalone LiFePO4 rack modules usually needs, what each one is for, and the mismatches that commonly hold a shipment at the loading port.
Scope: standalone 19-inch rack modules shipped by sea as UN3480 cargo, in full-container or shared-container loads. The bank is modular: modules can ship in separate consignments, and expansion modules ordered later ship under the same document set — the papers are prepared fresh for each shipment, confirmed per project. Air freight follows different rules and has its own guide; the checks to run when the goods arrive are covered by the delivery acceptance checklist. Country-specific import licences and duty rules vary by destination and are not listed here as universal requirements — confirm them with your customs broker before ordering.

Documents at a glance
| Commercial invoice | Usually required |
| Packing list | Usually required |
| Safety Data Sheet (SDS) | Usually required |
| UN38.3 test summary | Usually required |
| Dangerous goods packaging certificate | Shipment-dependent |
| Transport identification report | Carrier-dependent |
| Certificate of origin | Destination-dependent |
| Battery specification sheet | Usually required |
| Import licence / customs code | Destination-dependent |
Source: LJY 51.2V rack module page.
Worked example
A 20 ft container holding 8 pallets — 48 rack modules in total — ships under one set of documents: one commercial invoice, one packing list, one SDS and one UN38.3 test summary covering the whole consignment. The packing list must match the physical count pallet by pallet; a count mismatch between the packing list and the pallets is a common reason a rack shipment is held at the loading port. Modules shipped on their own, without the equipment they power, are classified as UN3480 under the IMDG Code.
What to send before a proposal
- Destination port and country, so the document set can be matched to local requirements
- Module count and whether the shipment is full-container or shared-container
- Whether the modules ship on their own (UN3480) or inside equipment
- Your customs broker’s document checklist, if they have one, so nothing is prepared twice
Request the document pack
Send the destination, the module count and the shipment size, and LJY Energy will confirm which documents your shipment needs and prepare the supplier-side papers — invoice, packing list, SDS, UN38.3 test summary and specification sheet — with the shipment. We coordinate OEM/ODM battery supply from Shenzhen; we are not a factory, and every order is confirmed in writing before production.

Request the rack import document pack · WhatsApp +86 159 8945 0735
