LiFePO4 storage for solar installers in Port Vila, Vanuatu

In Port Vila and on nearby islands, solar installers are often asked to add a storage module to a house, a shop or a small lodge, and then to repeat that SKU on the next roofs. Anyone searching for LiFePO4 storage for solar installers in Vanuatu needs a documented 51.2V wall or rack module, and must confirm the charge window and the CAN or RS485 port on that inverter model — not copy a protocol name from a list. This page is about that repeatable module. It is not a utility-storage page and it is not a page for a single off-grid camp.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory and we do not install in Vanuatu. We coordinate 51.2V wall-mounted and rack modules. The charge window and the communication port are confirmed per inverter model and firmware. We do not publish a compatibility verdict.

A market in Port Vila, used as context for Vanuatu solar installers, not as a product image
Photo: Department of Foreign Affairs and Trade, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a storage proposal for installers in Port Vila · WhatsApp +86 159 8945 0735

What the installer defines per roof

PointWhy it mattersConfirmed per project
51.2V wall-mountedmany houses and shopskWh and wall space
51.2V rackplant rooms or several modulesmodule count and cabinet space
Inverter protocolCAN or RS485, and the charge windowconfirmed per inverter model and firmware
Daily energyhow much the house or shop actually usesmeasured kWh or watts × hours
Installationnot part of the supplyLJY does not install on site

A 51.2V name is not an approval of any inverter. The installer confirms the window and the intended port on the first Port Vila roof, then freezes that SKU for later jobs.

What the installer sends before a proposal

  • Inverter model and firmware version.
  • Whether the cable is intended for CAN or for RS485.
  • Measured daily kWh, or watts and hours, of the house or shop.
  • Wall or cabinet space for the module.
  • How many roofs are expected to share the same SKU after the first job.

Prove one roof, then repeat the SKU

Installers who record the protocol on a first Port Vila roof, and then freeze the module, can put the same SKU on later houses and shops without guessing. Prices and lead times only in a quotation.

The waterfront in Port Vila, used as context for houses and shops that add a 51.2V storage module, not as a product image
Photo: Bahnfrend, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Inverter model and site list → module proposal → first roof → later jobs. Prices, quantities and lead times only in the formal offer.

Send the inverter model and the first roofs and request a proposal

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.