Electric boda battery packs in Uganda

Boda-boda motorcycles carry a large share of daily trips in Kampala and Entebbe, often up hills and through heavy rain. Electric versions and conversion kits now arrive with nameplates of 48V, 60V or 72V; any 60V or 72V supply is confirmed per project. A fleet owner looking for an electric boda battery pack in Uganda has to match the pack to the charger and controller, not to the name.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory. Our three-wheeler pages describe a 48V-class pack as 51.2V with 16 cells in series, charged at 58.4V, and say lead-acid chargers are not suitable. Any 60V or 72V pack is confirmed per project, because series count, charge cut-off and BMS must fit the controller of that boda.

Boda-boda motorcycles in traffic in Kampala, Uganda
Photo: Sigirenda, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a quote for a Ugandan boda pack · WhatsApp +86 159 8945 0735

What to check on the boda

ItemWhy it mattersConfirmed per project
Present chemistrylead-acid, NMC or LiFePO4 change the charge voltagedatasheet of the old pack
Chargermust stop at the new pack’s charge voltagemodel and charge profile
Controllerhigh and low voltage cut-offsvalues from the maker
Hills and rainpeak current and IP ratingmounting position
48V 100Ah three-wheeler pack51.2V 16S referencecapacity per route

A lead-acid charger is not acceptable on a LiFePO4 pack; the charger is replaced or reprogrammed as part of the change.

Nominal voltage, charge cut-off, series count and BMS

A 48V, 60V or 72V nameplate (60V and 72V supply confirmed per project) does not say how many cells are in series or where the charger must stop. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from Battery University charge limits. Every 60V or 72V pack is confirmed per project.

Chemistry and seriesNominalCharge cut-offBMS configuration
LiFePO4 16S (3.2V / 3.65V per cell)51.2V58.4V16S board
LiFePO4 20S64.0V73.0V20S board
LiFePO4 24S76.8V87.6V24S board
NMC 16S (3.6V / 4.2V per cell)57.6V67.2V16S board, NMC limits
NMC 20S72.0V84.0V20S board, NMC limits
Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell)60V69.0–73.5Vno BMS; LiFePO4 replacement confirmed per project
Lead-acid 72V (6 × 12V, 36 cells)72V82.8–88.2Vno BMS; LiFePO4 replacement confirmed per project

A 72V NMC boda charges to 84.0V, while a 24S LiFePO4 pack stops at 87.6V, so 72V supply is confirmed per project and charger, controller and BMS are checked together. A BMS is built for one series count: a 16S board cannot protect a 20S pack. We never infer compatibility from a voltage name.

What fleets send before a quote

  • Photo of the vehicle nameplate and the present pack label.
  • Controller model and its cut-off voltages.
  • Charger model and whether it can be reprogrammed.
  • Daily distance, hills and whether the pack sits in rain splash.
  • UN38.3 and SDS for the chosen pack come with the quote; import stays with the importer.

Pilot a few boda first

Fleets that run a pack on a few Kampala boda for a month of real shifts, then fix one specification, avoid mixing chargers and spare parts. Prices and lead times only in a quotation.

A boda-boda rider waiting for a passenger in Kabalagala, Kampala
Photo: BabyJat, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Vehicle, controller and charger data → series count and pack proposal → pilot vehicles → fleet orders. Prices and lead times only in the formal quote.

Send your vehicle details and request a pack proposal

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.