Easy-bikes and battery rickshaws carry a large share of short trips in Dhaka and in district towns across Bangladesh. Most still run on a string of 12V lead-acid batteries charged overnight in a garage, and the set is replaced again and again. An owner or workshop looking for an easy-bike battery in LiFePO4 for Bangladesh has to match the new pack to the charger, the controller and the routes, not only to the voltage written on the old set.
LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory. Our three-wheeler pages describe a 48V-class pack as 51.2V with 16 cells in series, charged at 58.4V, and say lead-acid chargers are not suitable. A 60V-class LiFePO4 pack is confirmed per project, because the series count, charge cut-off and BMS settings must fit the controller of that vehicle.

Request a quote for an easy-bike LiFePO4 pack · WhatsApp +86 159 8945 0735
What changes in a conversion
| Item | Lead-acid set | LiFePO4 pack (confirmed per project) |
|---|---|---|
| Charger | lead-acid profile | LiFePO4 CC/CV at the pack’s charge voltage |
| Controller cut-offs | set for lead-acid | checked against the new full and empty voltage |
| Series count | number of 12V blocks | cells in series, written in the quote |
| Flooded streets | open terminals | IP rating and connector position |
| 48V 100Ah three-wheeler pack | 51.2V 16S reference | capacity per route |
Using a lead-acid charger on a LiFePO4 pack is not acceptable; the charger is replaced or reprogrammed as part of the conversion.
Nominal voltage, charge cut-off, series count and BMS
A voltage name such as 48V or 60V (any 60V supply is confirmed per project) does not say how many cells are in series or what the charger must stop at. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from the charge limits published by Battery University. Any 60V or 72V pack is confirmed per project.
| Chemistry and series | Nominal | Charge cut-off | BMS configuration |
|---|---|---|---|
| LiFePO4 16S (3.2V / 3.65V per cell) | 51.2V | 58.4V | 16S board |
| LiFePO4 20S | 64.0V | 73.0V | 20S board |
| LiFePO4 24S | 76.8V | 87.6V | 24S board |
| NMC 16S (3.6V / 4.2V per cell) | 57.6V | 67.2V | 16S board, NMC limits |
| NMC 20S | 72.0V | 84.0V | 20S board, NMC limits |
| Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell) | 60V | 69.0–73.5V | no BMS; LiFePO4 replacement confirmed per project |
| Lead-acid 72V (6 × 12V, 36 cells) | 72V | 82.8–88.2V | no BMS; LiFePO4 replacement confirmed per project |
A 60V lead-acid set charges up to about 73.5V, while a 20S LiFePO4 pack stops at 73.0V and a 19S pack near 69.4V, so the same name can hide different chargers and controller limits; supply of any 60V pack is confirmed per project. A BMS is built for one series count: a 16S board cannot protect a 20S pack. We never infer compatibility from a voltage name.
What workshops and owners send before a quote
- Present battery set: number of 12V blocks and capacity.
- Controller model and its low and high cut-off voltages.
- Charger model and whether it can be reprogrammed.
- Daily distance, passengers and charging place.
- UN38.3 and SDS for the chosen pack come with the quote; import stays with the importer.
Convert a few vehicles first
Workshops that convert a handful of easy-bikes, log a monsoon month of daily charging and then fix one pack specification avoid mixing chargers and controllers across the fleet. Prices and lead times only in a quotation.

How we proceed
Vehicle, controller and charger data → series count and pack proposal → pilot vehicles → fleet orders. Prices and lead times only in the formal quote.
Send your easy-bike details and request a pack proposal
LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.
