Victron MultiPlus-II 48V: DC window, charge current and GX checklist

The MultiPlus-II 48/3000/35-32, 48/5000/70-50, 48/8000/110-100, 48/10000/140-100 and 48/15000/200-100 units form one 48 V inverter/charger family. Anyone searching for a Victron MultiPlus-II 48V battery checklist needs the official battery-voltage window, the current limit by model and the ports, not a compatibility verdict inferred from a 51.2V name or copied from another family. The official range is 38–66 V; 66 V is confirmed per project. Unlike hybrids with a direct CAN or RS485 battery port, this family is integrated through VE.Bus and a GX device, and the 57.6 / 55.2 / 52.8 V figures in the datasheet are factory defaults, not a LiFePO4 setting.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory and we do not sell this inverter. We coordinate 51.2V modules with CAN or RS485 when a project asks for that port. The charge settings, the charge window and the intended port are confirmed per inverter model and firmware, so this page publishes no compatibility verdict for the family.

Victron inverter/chargers (Quattro series) mounted on a wall, used to illustrate a MultiPlus-II 48V battery checklist.
Photo: Asurnipal, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request the Victron MultiPlus-II 48V checklist · WhatsApp +86 159 8945 0735

What the official document states

PointPublished factWhat the installer confirms
ModelsMultiPlus-II 48/3000/35-32, 48/5000/70-50, 48/8000/110-100, 48/10000/140-100 and 48/15000/200-100the rating plate on the unit on site
Battery type / charge defaultsnot listed by type; factory charge defaults absorption 57.6 V, float 55.2 V, storage 52.8 Vthe chemistry of the bank on site
Voltage range38–66 V; 66 V is confirmed per projectthe pack’s planned charge-voltage limit against this window
Current35 / 70 / 110 / 140 / 200 A battery charge current for the 3 / 5 / 8 / 10 / 15 kVA modelsthe limit of this model and of the bank
InterfaceVE.Bus port; monitoring and control via Cerbo GX or Ekrano GXthe intended method in the inverter documents
Other familiesDeye, Sunsynk, SolaX and Growatt hybrids with a direct CAN/RS485 battery port, and Victron’s compatibility-list topicdo not copy figures from those families
Verdictnone is published here; a 51.2V name is not an approvalprotocol and window confirmed per model and firmware

A 51.2V name is not an approval. The official window of this family is 38–66 V; 66 V is confirmed per project. Figures from other families (Deye, Sunsynk, SolaX and Growatt hybrids with a direct CAN/RS485 battery port, and Victron’s compatibility-list topic) do not belong on this checklist.

What the installer sends before a proposal

  • Inverter model and firmware version, read from the unit on site.
  • Pack voltage, series count and BMS.
  • The planned charge-voltage limit, checked against the 38–66 V window; 66 V is confirmed per project.
  • Whether the cable is intended for CAN or for RS485.
  • A written confirmation from the battery supplier, if available.

Treat this family as its own datasheet

Installers who record the window, the current limit of the exact model and the intended port on the first unit, instead of copying a row from another family, avoid a silent mismatch once several sites are wired. Prices and lead times only in a quotation for the Victron MultiPlus-II 48V.

An inverter with a battery bank in a solar installation, used to illustrate checking the DC window before wiring.
Photo: PowerAfricaSolar, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a written check

Send the inverter model, the firmware, the pack series count and the intended port. We reply with the official window and the points still to be confirmed, not with a verdict.

Send the model and firmware

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.