UN38.3 Test Summary Checklist for LiFePO4 Buyers

How to Read a UN38.3 Test Summary for LiFePO4 Cells and Packs

If you import LiFePO4 cells or packs, freight forwarders, airlines, and your own customers will ask whether the product has a UN38.3 test summary. Many first orders stall here: the supplier sends a file, but the model, watt-hour rating, or manufacturer on that file does not match the invoice.

This page is a buyer verification checklist. It is not a legal opinion, and it does not classify your cargo. Classification, packing, marks and the transport documents for a given consignment must be confirmed with a dangerous-goods (DG) certified forwarder against the current modal regulations.

Short answer

  • A UN38.3 test summary is a standardized extract of the design-type transport tests in the UN Manual of Tests and Criteria, Part III, sub-section 38.3, paragraph 38.3.5.
  • Fact: Manufacturers and subsequent distributors must make the test summary available. The IATA Lithium Battery Guidance Document revised for the 2026 Regulations says this applies to cells or batteries and equipment powered by cells and batteries manufactured after 30 June 2003, except for button cells installed in equipment (including circuit boards). The same guidance lists ten required information elements (a–j).
  • Fact: The test summary is not automatically a shipping document that has to travel with every consignment. IATA states that it does not support requiring a paper copy with every shipment, unless a particular State or operator has specified that as a requirement. Making it available can include a website, QR code, or URL.
  • Fact: A test summary is not an SDS, a dangerous-goods declaration, a quality or cycle-life report, or a market-access certificate (UL, IEC, CE and similar).
  • Your job as the buyer is to confirm that the summary you were given identifies the exact cell or pack being purchased, and that the identifiers also match the commercial invoice, packing list, and SDS.

What each document is for

Document What it is What it is not
UN38.3 test summary Evidence that the **design type** passed the applicable 38.3 tests, with the identification fields listed in 38.3.5 A packing instruction, a shipper’s declaration, or proof of Grade A cell quality
Full UN38.3 test report The underlying laboratory report referenced by the unique report number on the summary Something you must attach to every booking; ask for it when the summary is incomplete or inconsistent
SDS / MSDS A workplace safety data sheet for supply and use, when one is issued for the product **Fact (IATA 2026 guidance, Part G):** an SDS is **not a transport document**, and the IATA DGR does not require an SDS containing UN38.3 test data when offering batteries for transport
Shipper’s declaration / DG declaration The formal transport declaration for the mode and section that requires one A substitute for design-type testing
Commercial invoice and packing list The commercial record of model, quantity, weight and value Proof that the design type was tested

For SDS contents and how they differ from the test summary, use the existing LiFePO4 battery SDS guide. For the sea-freight booking pack, use the UN3480 vs UN3481 IMDG guide. For air, use the companion LiFePO4 air freight document guide.

The ten fields the test summary must contain

Fact: The IATA Lithium Battery Guidance Document (revised for the 2026 Regulations; based on the 2025–2026 ICAO Technical Instructions and the 67th edition of the IATA DGR) reproduces the information that “shall be provided” in the test summary, in accordance with sub-section 38.3 of the Manual. Check these fields on the file you receive:

  1. (a) Name of the cell, battery, or product manufacturer, as applicable.
  2. (b) That manufacturer’s contact information: address, phone number, email, and website.
  3. (c) Name of the test laboratory, including address, phone number, email, and website.
  4. (d) A unique test report identification number.
  5. (e) Date of the test report.
  6. (f) Description of the cell or battery, including at a minimum: whether it is a lithium-ion, lithium-metal, or sodium-ion cell or battery; mass; watt-hour rating or lithium content; a physical description; and model numbers.
  7. (g) List of tests conducted and results (pass/fail).
  8. (h) Reference to assembled-battery testing requirements, if applicable (38.3.3 (f) and 38.3.3 (g)).
  9. (i) Reference to the revised edition of the Manual of Tests and Criteria used, and to amendments thereto, if any.
  10. (j) Name and title of the responsible person, as an indication of the validity of the information provided.

Fact (IATA FAQ C.11): there is no mandated layout. Different laboratories use different templates. Missing required information is a problem; a different heading order is not, by itself, a reason to reject the file.

Fact (IATA FAQ C.02 and C.03): one document may cover multiple batteries, manufacturers, or products, and may list more than one test laboratory, provided all required information is stated. Each cell, battery, or product listed still needs its test report number and date.

Buyer matching checklist (do this before you book freight)

Use the same identifiers on four records: the test summary, the quotation or proforma, the commercial invoice / packing list, and the SDS (if one is issued). If any of the following do not match, stop and ask for a corrected file before the cargo is booked.

  • Chemistry class. For LiFePO4 packs and cells, the description should identify a lithium-ion cell or battery, not lithium metal. Watt-hour rating, not lithium content, is the energy field used for lithium-ion.
  • Model number. The model on the summary must be the model you are buying. A summary for a 12.8 V 100 Ah pack does not cover a 51.2 V 100 Ah pack, a private-label rename, or a pack that changed BMS, enclosure, or cell type. Inference: buyers often accept a “similar Ah” file because the chemistry looks the same. That is not how design-type testing works.
  • Watt-hour rating and mass. Compare Wh and mass with the specification and with any Wh marking you expect on the case. Inconsistent Wh is a common booking query.
  • Manufacturer name. The name on the summary should be reconcilable with the manufacturer or product-manufacturer field on commercial documents. If the pack is assembled by one party from cells made by another, ask which design type the summary covers — the cell, the pack, or both — and which report numbers apply.
  • Unique report number and date. Record both. If you later need the full report, this is the reference to request.
  • Pass/fail list. Confirm that the tests listed are shown as passed for the design type. This page does not restate pass/fail criteria; those sit in the Manual, not in a marketing sheet.
  • Edition of the Manual. The summary should say which revised edition (and amendment, if any) was used. Do not assume that a different edition than the one your forwarder expected automatically makes the file invalid. Modal regulations and transition periods differ; ask the forwarder to read the actual reference rather than rejecting the file on a year alone.
  • Assembled-battery note, if applicable. If you are buying a battery assembled from tested cells, look for the 38.3.3 (f) / (g) reference when it applies, or ask the supplier to explain why it does not.

Write the request in one block so the answer can be filed with the order:

Please confirm the exact manufacturer, model, chemistry, configuration, mass and watt-hour rating being quoted. Please provide the UN38.3 test summary for that exact type, including the unique test report number and date. Please state whether the summary covers the cell, the assembled battery, or both, and whether any later design change requires a new test. The planned route is [origin] to [destination] by [air/sea].

Misconceptions that delay shipments

  1. “The test summary must be printed and packed in every carton.” Fact: IATA says the obligation is to make the summary available, and that it does not support requiring a paper copy with every shipment unless a State or operator has made that a requirement. Ask your forwarder whether the chosen carrier or destination authority has such a condition. Do not treat a missing paper insert as automatic non-compliance, and do not assume a website link will be accepted on every lane.
  2. “The SDS is the UN38.3 document.” Fact: they are different documents. An SDS is not a transport document. See the SDS guide.
  3. “A test summary expires every year, like some transport appraisals.” Fact (IATA FAQ C.10): the test summary is not valid for a defined period. If the cell or battery type has not been changed in a way that would require re-testing, the summary remains valid. Inference: some China-export “transport appraisal” documents used in export clearance are a different instrument and may have their own validity practice. Do not copy that calendar onto the UN38.3 summary. See the China lithium battery export rules for the export-side document set.
  4. “Any 100 Ah LiFePO4 report will do.” Fact: the description must include the model numbers of the type that was tested. A different voltage, cell, BMS, or enclosure can be a different design type.
  5. “If they have UN38.3, the product is certified for my market.” Fact: UN38.3 addresses transport testing of the design type. It is not a substitute for destination market rules, product safety standards, or the checks in the battery certification verification guide.
  6. “UN38.3 proves Grade A cells or cycle life.” Fact: transport tests are not a factory incoming-quality programme. For physical receiving tests, use the incoming inspection guide. For document matching at the dock, use the delivery document acceptance checklist.

What this page does not decide

  • It does not assign a UN number, packing instruction, or section to your cargo.
  • It does not state that LJY Energy holds a named UN38.3 report for every model. Which documents exist for a given model, and whose name appears on each one, is stated in the quotation.
  • It does not invent laboratory accreditation rules. Some buyers or China-export processes ask for a specific accreditation; that is a commercial or local-export condition to confirm with the supplier and broker, not a field invented here as a universal UN requirement.
  • It does not set prices, MOQ, lead time, or testing fees.

Where LJY fits

LJY Energy is a LiFePO4 battery supplier. If you are sourcing packs or cells and need to know which documents apply to a named model and route, send the model list, quantity, origin/destination, and transport mode through the contact form. We will reply with the document list for that enquiry. We do not publish a blanket certification claim on this page.

FAQ

Does a UN38.3 test summary have to travel with the cargo? Only if a particular State or operator requires it for that movement. Otherwise the duty is to make it available on request. Confirm the lane with your forwarder.

Is a full test report the same as the test summary? No. The summary is the standardized extract. The unique report number on the summary points to the underlying report. Request the full report if fields are missing or identifiers do not match.

Can one summary cover several models? Yes, if all required information is present for each listed type, including each report number and date.

How long is a test summary valid? It is not given a fixed expiry in the IATA 2026 guidance. It remains valid unless the type changes in a way that requires re-testing. Confirm any design change (cells, BMS, enclosure, electrical configuration, and similar) with the party that holds the report.

Does UN38.3 replace an SDS or a dangerous-goods declaration? No. Each document has a different job. The test summary does not pack, mark, or declare the shipment.

Sources

  • IATA, Lithium Battery Guidance Document — Transport of Lithium Metal, Lithium Ion and Sodium Ion Batteries, revised for the 2026 Regulations (based on the 2025–2026 ICAO Technical Instructions and the 67th edition (2026) of the IATA DGR). The document states that it is intended for guidance only and should not be relied upon as a source of regulatory compliance. PDF. Accessed 17 November 2026. Fields a–j and FAQs C.02, C.03, C.05, C.10, C.11, G.01, and G.04 are taken from this edition (in-document date 01/01/2026).
  • UNECE, UN Manual of Tests and Criteria, 8th revised edition (2023) and Amendment 1 (2025), Part III, sub-section 38.3, including paragraph 38.3.5. Publication page. The field list in the article is quoted from the IATA 2026 guidance’s reproduction of the Manual requirements; readers should check the current Manual text with their DG specialist.

Related guides

Request a document review for your model

Contact LJY Energy · WhatsApp +86 159 8945 0735