SRNE HF-series off-grid inverters such as the HF4850S80-H are installed in homes, shops and farms from Nigeria to Pakistan, often with 48V-class LiFePO4 batteries. On site the installer scrolls to program 08, sees L14, L15 and L16, then to program 33 with a list of three-letter brand codes. Anyone searching for SRNE HF4850 lithium battery settings wants to know what each program really means.
LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we make no claim about any SRNE product. According to the public manual, program 08 selects LiFePO4 with 14, 15 or 16 cells in series, program 32 sets the RS485 port to BMS or CAN mode, and program 33 selects a battery brand protocol. Our pack’s series count and protocol are given in writing per inverter firmware.

Request a pairing check for an SRNE inverter · WhatsApp +86 159 8945 0735
What the SRNE manual says
| Program | Public source | What to confirm per project |
|---|---|---|
| 08 battery type | L14 / L15 / L16 = LiFePO4 14, 15 or 16 strings; CV 49.2 / 53.2 / 56.8V | real series count of the pack |
| 32 port mode | RS485 port used for BMS or CAN communication | which port and cable the BMS uses |
| 33 brand protocol | codes such as PYL, DAQ, PAC, RDA, WOW | protocol code given by the battery supplier |
| Charge values | with BMS link, the BMS limits apply | values shown after the link comes up |
| Responsibility | manual lists settings, not approvals | written pairing record from the supplier |
L15 and L16 differ by one cell: a 16-cell pack set as L15 stops charging around 53.2V and never fills, while a 15-cell pack set as L16 would be pushed toward 56.8V. Count the cells before choosing.
Checklist before commissioning
- Inverter model and firmware version from the display.
- Series count of the pack, from its datasheet, not its voltage name.
- Program 08 value that matches that series count.
- Port mode in program 32 and brand code in program 33, given in writing by the battery supplier.
- CAN or RS485 cable pinout on both ends, and the BMS data shown after the link comes up.
Record the working settings
Installers who photograph programs 08, 32 and 33 and note them with the battery model can repeat a working SRNE site without guessing again. Prices and lead times only in a quotation.

How we proceed
Your SRNE model and firmware → our series count and protocol notes → bench or site test → documented pairing. We do not publish compatibility verdicts.
Send your SRNE model and firmware and request a check
LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.
