Solis S5-EH1P-L: 48V battery, 42–58 V window and CAN checklist

The Solis S5-EH1P(3-6)K-L is a single-phase low-voltage hybrid inverter used with 48V-class batteries in homes and small shops. On site the installer wires a CAN cable, hopes the voltage window matches the pack, and sometimes confuses the meter RS485 port with the battery port. Anyone searching for a Solis S5-EH1P-L 48V battery CAN checklist wants the maker’s own figures, not a copied setting from another hybrid brand.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we make no claim about Solis products. The official S5-EH1P(3-6)K-L datasheet describes a Li-ion or lead-acid battery, a 42–58 V window, a 50–2000 Ah capacity range, and a maximum charge and discharge current of 62.5 A or 100 A according to the power class, with battery communication listed as CAN. The series installation manual says the CAN port is for the lithium-battery BMS, with CAN-H on pin 4 and CAN-L on pin 5, and tells the installer to check that the inverter and battery pin sequences match before connecting. The RS485 port in the same chapter is for the compatible smart meter, not for the battery BMS. We do not treat a 51.2V pack as approved because the voltage name looks close.

A roadside service area, used only as general context, not as a pairing claim with a Solis inverter
Photo: Arkelin, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a battery checklist for a Solis S5-EH1P-L job · WhatsApp +86 159 8945 0735

What the Solis S5-EH1P-L documents say

PointPublic sourceWhat to confirm per project
Voltage windowbattery type Li-ion / lead-acid; range 42–58 Vthat the pack on site stays inside this window, including at charge end
Current and powermax charge/discharge 62.5 A or 100 A, 3 kW or 5 kW, by modelpack and inverter limits actually used
Battery portcommunication with the battery listed as CANthat CAN, not the meter RS485, is the cable to the BMS
CAN pinsCAN-H pin 4, CAN-L pin 5 (EIA/TIA 568B); pin sequence to be checkedpin order at both ends before the cable is seated
Capacity range50–2000 Ah on the datasheetmodule count and current for the job

A voltage name on a pack, or a CAN plug that fits, is not an approval. The installer confirms the window and the pin order against the S5-EH1P-L firmware and the pack BMS, and with a test if needed. We publish no compatibility verdict.

What the installer sends before a proposal

  • Solis S5-EH1P-L model (3K to 6K) and firmware version.
  • Pack voltage, series count and BMS.
  • Whether the cable is intended for the CAN battery port, not the meter RS485.
  • The pin order the installer plans to use at each end.
  • Whether the battery supplier has confirmed the pairing in writing.

Check the pins, then test

Installers who record the CAN pin order and see live BMS data on a first S5-EH1P-L unit avoid a silent window or pin mismatch after several homes are already wired. Prices and lead times only in a quotation.

A motorway service yard, used only as general context, without any compatibility claim
Photo: Oxfordian Kissuth, Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

S5-EH1P-L model, pack data and port → checklist against the datasheet and manual → first test → later jobs. Prices and lead times only in the formal quote. We do not publish a compatibility verdict.

Send the S5-EH1P-L model and pack data and request a checklist

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.