At Kivukoni in Dar es Salaam and at smaller coastal landings, fish arrives in the heat and often sits until it is sold. Solar cold rooms let traders rent crates of cold space, but the compressor still has to run after sunset. An integrator searching for a solar cold storage battery for Tanzanian fish markets needs to know how much storage the night really requires.
LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory; we do not supply cold rooms or install them. Many solar cold rooms store cold in thermal mass and run the compressor mostly on daytime PV, which reduces the battery needed. Where a battery is justified, we size 25.6V or 51.2V banks to compressor power and night hours for each landing.

Request a quote for a fish-market cold-room battery · WhatsApp +86 159 8945 0735
What drives the battery size
| Item | Why it matters | Confirmed per project |
|---|---|---|
| Thermal storage | cold held in mass lowers night compressor hours | design of the cold room |
| Compressor power | average and start-up power | data from the refrigeration supplier |
| Night hours | energy = kW × hours | measured on a pilot room |
| 51.2V wall module | 10.24 kWh reference | number of modules and inverter protocol |
Opening the door every few minutes during market hours raises the load far more than the outside heat; door discipline is part of the sizing.
What the integrator sends before a quote
- Cold-room volume, target temperature and insulation.
- Compressor model and measured power.
- Hours the room must stay cold without sun.
- PV array size and inverter model.
- UN38.3 and SDS for the chosen bank come with the quote; import stays with the importer.
Measure one room first
Integrators who log one cold room through a dry month and a rainy month can size the battery for the next landings from data, not guesses. Prices and lead times only in a quotation.

How we proceed
Cold-room and compressor data → battery proposal → pilot room → roll-out to more landings. Prices and lead times only in the formal quote.
Send your cold-room data and request a battery proposal
LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.
