Pylon protocol with a 16S battery: what differs from a US5000

Open the battery menu of many hybrid and off-grid inverters and you will find an option called Pylon, PYL or Pylontech. Because it is so common, many battery makers say their pack ‘speaks Pylon’, and installers assume it will behave like a Pylontech US5000. Anyone searching for the Pylon protocol with a 16S battery should first know what Pylontech actually publishes for that module.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we make no claim about any Pylontech product. The US5000 manual describes a 48V module in the 15S class, charged between 52.5 and 53.5V, with CAN at 500 kbps and RS485. A 16S pack has a 51.2V nominal voltage, so its protocol and voltage window are confirmed per inverter and firmware.

A lithium iron phosphate battery with its terminals
Photo: HasanAbuarja, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a protocol check for your inverter · WhatsApp +86 159 8945 0735

What Pylontech publishes for the US5000

ItemPublished US5000 valueWhat to ask for a 16S pack
Nominal voltage48V (15S LiFePO4 class)51.2V, 16 cells in series
Energy4.8 kWh nominal / 4.56 kWh usablenominal and usable energy of the pack
Charge window52.5–53.5Vcharge voltage the BMS will request
Discharge range43.5–53.5V, 100A max continuouscut-off and current limits
CommunicationCAN 500 kbps; RS485 9600/115200; up to 16 per stringbaud rate, addressing, parallel count

When a 16S pack sends its own limits over the protocol, the inverter normally follows the BMS. Problems start when an inverter uses fixed Pylon-type values or the pack sends values the inverter does not expect, so the datasheet and a bench test settle it.

Checklist before using a Pylon setting

  • Series count of the pack: 15S or 16S.
  • Charge voltage and current the BMS requests over CAN or RS485.
  • Inverter firmware and whether it follows BMS limits or fixed values.
  • Baud rate, addressing and maximum number of packs in parallel.
  • A written statement from the battery supplier on which inverter firmware was tested.

Ask for the tested firmware

Installers who ask the battery supplier which inverter firmware a ‘Pylon’ pack was tested on, and keep that note, avoid the most common commissioning failures on site. Prices and lead times only in a quotation.

A portable lithium battery power station
Photo: P1898, Wikimedia Commons, CC BY 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Your inverter and firmware → our pack data and protocol notes → bench or site test → documented pairing. We do not publish compatibility verdicts.

Send your inverter and firmware and request a check

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.