LiFePO4 storage for off-grid sites in the Solomon Islands

Around Honiara, in Auki on Malaita and across the outer provinces, clinics, schools and small grids still lean on diesel that is costly to ship between islands. EPC contractors and NGOs add solar and storage to cut generator hours. Anyone searching for LiFePO4 storage for off-grid sites in the Solomon Islands needs the bank in kWh from measured essential watts × autonomy hours, and packing that survives an inter-island boat.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for isolated sites. We do not supply PV arrays, inverters, diesel sets or civil works, and we make no uptime guarantee.

Honiara waterfront, used to illustrate battery storage for off-grid sites in the Solomon Islands.
Photo: Jenny Scott from Adelaide, Australia, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a Solomon Islands EPC sizing · WhatsApp +86 159 8945 0735

Example: a small rural clinic

LoadMeasured watts (example)Hours on battery
Vaccine fridgeabout 80 W average14 h
Lightsabout 120 W8 h
Radio and laptopabout 90 W6 h
Totalabout 1.12 + 0.96 + 0.54 ≈ 2.6 kWh per nightplus losses and a reserve

Example only. Measure each load and its hours on site; the array’s peak watts are not the energy the bank must store.

What the EPC sends before a proposal

  • Measured essential watts and the hours each load runs.
  • Autonomy hours or days required.
  • System voltage, inverter and existing PV or diesel.
  • Shipping route, boat handling and island access.
  • Room temperature and ventilation at the site.

Prove one site, then repeat across provinces

EPCs that prove one clinic design and repeat it across provinces simplify spares on islands far from Honiara. Prices and lead times only in a quotation.

A fuel stop in Auki, Malaita, used to illustrate cutting diesel hours with a battery bank.
Photo: Irene Scott/AusAID, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request an EPC bank sizing

Send the measured loads, autonomy and route. We reply with a kWh-based bank proposal for batteries only.

Send the site loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.