LiFePO4 battery for water kiosk RO pumps in Kenya

Across Nairobi’s informal settlements, in Naivasha and around Kisumu, water kiosks and water ATMs sell treated water by the jerrycan or by token. A typical small unit runs a feed pump, a high-pressure reverse-osmosis pump, a UV lamp and a dispenser controller. When the grid drops or the afternoon turns cloudy, the pumps stop and the kiosk stops selling. Anyone searching for a LiFePO4 battery for water kiosk RO pumps in Kenya needs the bank sized in kWh from measured watts × the hours the kiosk sells on battery, not from a pump’s nameplate kW or a copied ampere-hour label.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for the electrical load of a kiosk. We do not supply RO units, membranes, UV units, dispensers or tanks, and we make no claim about water quality or litres per day; those belong to the unit builder and the local water authority.

A small roadside kiosk in Naivasha, used to illustrate battery backup for a water kiosk in Kenya.
Photo: SuSanA Secretariat, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a water-kiosk battery sizing · WhatsApp +86 159 8945 0735

Example: one small RO kiosk

LoadMeasured watts (example)Hours on battery
Feed pumpabout 750 W4 h
High-pressure RO pumpabout 370 W4 h
UV lampabout 40 W4 h
Dispenser / token controllerabout 50 W4 h
Totalabout 1.21 kW × 4 h ≈ 4.8 kWhplus losses and a reserve

The figures are an example only. Measure your own pump, UV and controller watts and the hours the kiosk must sell on battery. Pump start current is confirmed with the inverter; the bank is not sized from a pump’s nameplate kW.

What the operator sends before a proposal

  • Measured watts of the feed pump, RO pump, UV lamp and controller.
  • Hours per day the kiosk must sell on battery, and the typical outage pattern.
  • System voltage and the inverter model, including pump start current.
  • Whether a PV array or a genset is already on site.
  • Enclosure type and the temperature inside it during the hot season.

Measure one kiosk, then repeat the design

Operators and NGOs who measure one kiosk and then repeat the same bank across a network spend less time on spares and training. Prices and lead times only in a quotation.

A kiosk in Bulbul near Nairobi, used to illustrate sizing a battery bank for pumps and a dispenser.
Photo: SuSanA Secretariat, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a kiosk battery sizing

Send the measured loads, the hours on battery and the inverter model. We reply with a kWh-based bank proposal for batteries only.

Send the measured pump loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.