LiFePO4 battery for solar fence energisers in Australia

On cattle stations in Queensland and the Northern Territory and on grazing properties in New South Wales, Victoria and Western Australia, remote paddocks are fenced with solar energisers that rely on their battery every night and through cloudy winter weeks. Anyone searching for a LiFePO4 battery for solar fence energisers in Australia needs it sized in Wh from the energiser’s measured average draw × 24 hours × the autonomy days wanted, not from the joule rating, and needs the solar controller or the energiser’s built-in charger checked against LiFePO4 before the swap. Cell-grazing setups with several energisers usually standardise on one battery per energiser model.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 12.8V LiFePO4 batteries for fence energisers. We do not supply energisers, solar panels, controllers, wire, posts or insulators, and we make no claim about containment, animal welfare or the compliance of a fence; installation and earthing stay with the fence contractor.

An electric fence energiser, used to illustrate batteries for solar energisers on Australian paddocks.
Photo: Gifford Jackson; PEL, Wikimedia Commons, CC BY 4.0 (resized, WebP). Illustration, not an LJY product.

Request an energiser battery check · WhatsApp +86 159 8945 0735

Example: one solar energiser

ItemExample valueNote
Measured average drawabout 4 Wpaddock fence, fence connected
Energy per dayabout 4 W × 24 h ≈ 96 Wh
Autonomy4 days≈ 384 Wh plus a reserve

Example only. Measure the draw on battery with the fence connected, because vegetation and poor insulators raise it; the joule rating is not the average draw.

What the installer sends before a proposal

  • Energiser brand and model.
  • Measured average draw on battery with the fence connected.
  • Autonomy days wanted for the worst season.
  • Solar panel and controller model, or the charging voltage in the energiser manual.
  • Enclosure size and the lowest and highest temperature inside it.

One battery per energiser model

Installers and dealers who measure one energiser model and keep one LiFePO4 battery for it across their farms carry fewer spares. Prices and lead times only in a quotation.

Beef cattle in Queensland, used to illustrate sizing a fence battery from the measured draw.
Photo: Iraphne R. Childs, Wikimedia Commons, CC BY 4.0 (resized, WebP). Illustration, not an LJY product.

Request an energiser battery check

Send the energiser model, the measured draw and the autonomy days. We reply with a battery proposal and the controller points still to be confirmed.

Send the energiser model

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.