LiFePO4 battery for dairy milking sheds in Australia

In Gippsland, the Goulburn Valley, western Victoria, Tasmania, south-west Western Australia and on the NSW South Coast, storms and bushfire-season power shutoffs can cut the supply at milking time, before the vat is cooled. Anyone searching for a LiFePO4 battery for dairy milking sheds in Australia needs the bank in kWh from the measured watts of the vacuum pump, milk cooling, lights and controls × milking or outage hours, not from the shed’s installed kW.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for the electrical load of a dairy shed. We do not supply milking plants, vacuum pumps, vats or controls, and we make no milk-quality or collection claim.

A dairy farm in Victoria, Australia, used to illustrate LiFePO4 batteries for milking sheds.
Photo: Mattinbgn, Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

Request a dairy-shed sizing · WhatsApp +86 159 8945 0735

Example: a small herringbone shed

LoadMeasured watts (example)Hours on battery
Vacuum pump (VSD)about 2.2 kW2 h
Milk coolingabout 1.5 kW2 h
Lights and controlsabout 300 W2 h
Totalabout 4.4 + 3.0 + 0.6 ≈ 8 kWhplus losses and a reserve

Example only. Measure your own equipment and hours on battery; the vacuum-pump start current is confirmed with the inverter.

What the farm sends before a proposal

  • Measured watts of vacuum pump, milk cooling, lights and controls.
  • Milking times and typical outage hours.
  • System voltage and inverter model, including pump start.
  • Whether a generator stays for long outages.
  • Battery location and temperature range.

One shed, then repeat

Dealers and co-operatives that measure one shed and repeat the bank across farms simplify spares and service. Prices and lead times only in a quotation.

A dairy delivery truck in Australia, used to illustrate milk cooling before collection.
Photo: OSX, Wikimedia Commons, Public domain (resized, WebP). Illustration, not an LJY product.

Request a dairy-shed bank sizing

Send the measured loads and hours. We reply with a kWh-based proposal for batteries only.

Send the measured loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.