Growatt SPH TL BL-UP: 42–59 V battery, CAN and RS485-2 checklist

The SPH 3000–6000 TL BL-UP is a hybrid family. It is not the SPF ES off-grid series, and its battery menus are not programmes 05 and 36. Anyone searching for a Growatt SPH 3000–6000 TL BL-UP battery CAN checklist needs the official voltage window, the current by model, and the port rule, not a compatibility verdict inferred from a 51.2V name or from an SPF page.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we do not claim to supply Growatt products. This page quotes the official SPH datasheet, installation manual and commissioning quick guide only. A Lithium Mode number or an entry on the Approved LV Battery List is not an approval. We do not publish a compatibility verdict. Protocol and the charge window are confirmed per inverter model and firmware.

A port skyline, used only as general context, not as a pairing claim with a Growatt SPH inverter
Photo: Zairon, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a battery checklist for a Growatt SPH TL BL-UP job · WhatsApp +86 159 8945 0735

Facts taken from the official SPH documents

PointWhat the documents stateThe installer still confirms
Voltage window42–59 V; Lithium or Lead-acidcharge end of the pack against this window
Currentmax charge/discharge 66 / 75 / 85 A by model (3000 / 3600 / 4000–6000)the limit of this SPH model and of the pack
Continuous power3000 / 3680 / 4000 W by modelthe power class on the nameplate
PortsCAN on the RJ45 port for lithium; CAN and RS485-2 cannot be used at the same timeone method, taken from the battery documentation
Menus and pinsBattery Mode Lithium; Lithium Mode 01 (CAN) for ALP; third-party codes from the Approved LV Battery List; BMS cable to CN4, CAN 4H / 5L or RS485 1B / 2Amodel, firmware, list code and pin order before connecting

A 51.2V name, or a programme number copied from an SPF ES unit, is not an approval. The installer chooses CAN or RS485-2, not both, and confirms the window and the protocol against this SPH model and the pack BMS.

What the installer sends before a proposal

  • SPH TL BL-UP model (3000 to 6000) and firmware version.
  • Pack voltage, series count and BMS.
  • The charge-voltage limit planned, against the 42–59 V window.
  • Whether the cable is intended for CAN or for RS485-2 — not both.
  • The Approved LV Battery List code, if one will be used, and written confirmation from the battery supplier if available.

Treat the SPH family as its own series

Installers who record the window, the current limit and a single communication method on a first SPH TL BL-UP unit, rather than copying an SPF ES setting, avoid a silent mismatch after several roofs are already wired. Prices and lead times only in a quotation.

A city skyline, used only as general context, without any compatibility claim
Photo: Andrew Moore, Wikimedia Commons, CC BY-SA 2.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

SPH model, pack data and port → checklist against the official datasheet, manual and quick guide → first test → later jobs. Prices and lead times only in the formal quote. We do not publish a compatibility verdict.

Send the SPH model and pack data and request a checklist

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.