Deye SUN-SG05LP1-EU-SM2-P: battery window, current and CAN checklist

The SUN-3.6K, 5K, 6K, 7K, 7.6K, 8K and 10K-SG05LP1-EU-SM2-P units form one single-phase low-voltage hybrid family. Anyone searching for a Deye SG05LP1-EU-SM2-P battery checklist needs the official battery-voltage window, the current limit by model and the ports, not a compatibility verdict inferred from a 51.2V name or copied from another family. The official range is 40–60 V; 60 V is confirmed per project. The SG05LP1-EU-SM2-P range runs from 3.6 to 10 kW, so the current limit changes a lot between models; it is not the older SG03LP1 single-phase row and not the three-phase SG04LP3.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory and we do not sell this inverter. We coordinate 51.2V modules with CAN or RS485 when a project asks for that port. The Lithium mode, the charge window and the intended port are confirmed per inverter model and firmware, so this page publishes no compatibility verdict for the family.

Solar modules on a barn roof, used to illustrate a Deye SG05LP1-EU-SM2-P battery checklist.
Photo: Stefan Thiesen, Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

Request the Deye SUN-SG05LP1-EU-SM2-P checklist · WhatsApp +86 159 8945 0735

What the official document states

PointPublished factWhat the installer confirms
ModelsSUN-3.6K, 5K, 6K, 7K, 7.6K, 8K and 10K-SG05LP1-EU-SM2-Pthe rating plate on the unit on site
Battery typeLead-acid or Lithium-ionthe chemistry of the bank on site
Voltage range40–60 V; 60 V is confirmed per projectthe pack’s planned charge-voltage limit against this window
Current90 / 120 / 135 / 175 / 190 / 190 / 210 A for the 3.6 / 5 / 6 / 7 / 7.6 / 8 / 10 kW modelsthe limit of this model and of the bank
InterfaceRS485 and CAN (WIFI for monitoring)the intended method in the inverter documents
Other familiesDeye SUN-SG03LP1 and SUN-SG04LP3, Sunsynk SG04LP1 and SolaX X1-HYB-LVdo not copy figures from those families
Verdictnone is published here; a 51.2V name is not an approvalprotocol and window confirmed per model and firmware

A 51.2V name is not an approval. The official window of this family is 40–60 V; 60 V is confirmed per project. Figures from other families (Deye SUN-SG03LP1 and SUN-SG04LP3, Sunsynk SG04LP1 and SolaX X1-HYB-LV) do not belong on this checklist.

What the installer sends before a proposal

  • Inverter model and firmware version, read from the unit on site.
  • Pack voltage, series count and BMS.
  • The planned charge-voltage limit, checked against the 40–60 V window; 60 V is confirmed per project.
  • Whether the cable is intended for CAN or for RS485.
  • A written confirmation from the battery supplier, if available.

Treat this family as its own datasheet

Installers who record the window, the current limit of the exact model and the intended port on the first unit, instead of copying a row from another family, avoid a silent mismatch once several sites are wired. Prices and lead times only in a quotation for the Deye SUN-SG05LP1-EU-SM2-P.

Rooftop solar panels in place, used to illustrate checking a low-voltage hybrid window before wiring.
Photo: David Hawgood, Wikimedia Commons, CC BY-SA 2.0 (resized, WebP). Illustration, not an LJY product.

Request a written check

Send the inverter model, the firmware, the pack series count and the intended port. We reply with the official window and the points still to be confirmed, not with a verdict.

Send the model and firmware

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.