Deye hybrid inverter Lithium mode: battery setup checklist

Deye low-voltage hybrid inverters such as the SUN-5K-SG03LP1-EU are installed with 51.2V LiFePO4 batteries on several continents. On site, the installer opens Battery Setting, chooses Lithium and types a number, and sometimes the screen fills with BMS alarms. Anyone searching for Deye hybrid inverter Lithium mode battery setup wants to know what the manual itself asks for before that number is entered.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we make no claim about any Deye product. The public manual lists four battery modes: Lithium, Use Batt V, Use Batt % and No Batt. For Lithium it states that this is the BMS protocol and refers to the Approved Battery document, where each battery has a setup number. The pack protocol is agreed per inverter and firmware.

Wall-mounted 5.8 kWh lithium battery next to a 5 kW hybrid inverter
Photo: WisePsyco, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a pairing check for a Deye inverter · WhatsApp +86 159 8945 0735

What the Deye documents say

PointPublic sourceWhat to confirm per project
Batt Modemanual: Lithium / Use Batt V / Use Batt % / No Battwhich mode the battery supports
Setup numberApproved Battery list: number entered in Lithium modenumber for your exact battery model
Charge valuesmanual: Li-ion charging is self-adapted to the BMSBMS-requested charge voltage and current
Voltage rangemanual: battery 40–60V for this seriespack window checked per project
Responsibilitylist note: purchaser confirms with the battery supplierwritten pairing record from the supplier

The Li-BMS page in the manual shows the charge voltage and current the BMS requests; reading it during commissioning is the quickest way to see whether the protocol is really talking.

Checklist before commissioning

  • Inverter model and firmware version, from the display.
  • Battery model and BMS firmware, and whether it appears on the Approved Battery list.
  • Setup number to enter in Lithium mode, given in writing by the battery supplier.
  • CAN or RS485 cable pinout on both ends.
  • Values shown on the Li-BMS page after the link comes up.

Record what worked

Installers who photograph the Li-BMS page and note the setup number for each battery model can repeat a working site in minutes instead of guessing again. Prices and lead times only in a quotation.

LiFePO4 cells connected with busbars inside a battery pack
Photo: Yo-Co-Man, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Your Deye model and firmware → our pack protocol and setup notes → bench or site test → documented pairing. We do not publish compatibility verdicts.

Send your Deye model and firmware and request a check

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.