Daly’s home energy-storage BMS is used in many 48V-class packs, with CAN or RS485 toward the inverter and a bus between packs in parallel. Assemblers often choose a profile because the plug looks right or because a brand name appears on a public list. Anyone searching for a Daly ESS BMS inverter CAN or RS485 profile needs the maker’s own warning: the same connector shape is not the same as a working pairing.
LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we make no claim to supply Daly products. Daly’s public ESS page describes 8S to 16S LiFePO4 or Li-ion boards, 100A, 150A and 200A classes, 150 mA passive balancing or optional 1A or 2A active balancing, UART plus CAN/RS485, automatic addressing, and up to 16 packs in parallel. A separate Daly article lists RS485 profiles including Voltronic, Growatt, SRNE, Pylontech (also mentioned for SOFAR) and Deye, and CAN profiles including Growatt, Victron, Pylontech (also mentioned for GoodWe, Sol-Ark and Xtender), SMA, Deye, AISWEI and SOFAR/MUST, and it tells the reader to confirm with Daly engineering. In a parallel stack, the boards talk to each other over internal RS485, and one host unit talks to the inverter.

Request a BMS review for your pack · WhatsApp +86 159 8945 0735
What Daly publishes
| Point | Public source | What to confirm per project |
|---|---|---|
| Cells and current | 8S–16S LiFePO4 or Li-ion; 100/150/200A classes | series count and current class |
| Balancing | 150 mA passive; optional 1A or 2A active | balancing mode actually fitted |
| Inverter profiles | named RS485 and CAN lists on Daly’s article | profile and firmware confirmed with Daly, not from the plug |
| Connector | Daly: the same connector shape is not compatibility | pinout and a live data test |
| Parallel packs | up to 16; internal RS485 between boards; one host to the inverter | addressing and which unit is host |
A name on a public profile list is a starting point, not a verdict. LJY does not publish a compatibility conclusion for any inverter and a Daly board.
Checklist before wiring
- BMS hardware and firmware version, and series count set on the board.
- Inverter model and firmware.
- CAN or RS485 profile, confirmed with Daly engineering for that pair.
- Cable pinout, and live current, voltage and SOC on the inverter after the link comes up.
- Parallel addressing, the host unit, and behaviour when one pack is switched off.
Test the stack before repeating it
Assemblers who test a full parallel stack with the real inverter, including one pack switched off, can repeat the design without new fault-finding. Prices and lead times only in a quotation.

How we proceed
Your inverter and application → review of Daly’s public documents → test → decision. We do not publish compatibility verdicts for third-party BMS.
Send BMS and inverter data and request a review
LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.
