Warehouse AGV & AMR Lithium Battery Packs — Custom LiFePO4 for Warehouse Robots

If you are searching for a warehouse AGV lithium battery or a replacement battery pack for a warehouse robot, you have already found the problem with this category: there is no standard shelf product to buy. Every warehouse AGV and AMR platform has its own battery bay, its own duty cycle, its own charging dock and its own expectations of what the battery should report to the vehicle controller. A pack that fits one robot is dead weight in another.

LJY Energy coordinates custom LiFePO4 battery packs for warehouse AGVs and AMRs. We are a China-based LiFePO4 supplier and OEM/ODM coordination partner: packs are built with qualified manufacturing partners against a specification that is confirmed in writing for your project before production. This page explains which platforms we build for, what the typical configurations look like, and exactly what to send us so a quotation can be written against your robot rather than against a catalogue.

Request a warehouse AGV / AMR battery quotation: AGV-Custom RFQ · WhatsApp: +86 159 8945 0735

Who This Is For

  • Warehouse AGV and AMR manufacturers — OEMs who need a battery pack designed around their vehicle: bay dimensions, weight budget, discharge profile and the CAN or RS485 signals their controller expects.
  • Warehouse automation integrators — integrators fitting lithium packs into mixed fleets, or replacing lead-acid packs in existing AGVs where the bay and charger are already fixed.
  • Fleet operators and retrofitters — operators whose original pack supplier is slow, discontinued, or unable to match the existing mechanical and communication interface.

The same custom process also serves adjacent mobile platforms — agricultural robots and airport ground support equipment (GSE) are handled the same way, as projects against a written specification rather than as catalogue items.

If you are buying finished storage or vehicle batteries rather than a robot pack project, see our finished battery products instead.

Typical Platforms

The ranges below are the platforms buyers most commonly bring to us. They are starting points for a specification conversation, not stock items: every figure for your pack is confirmed in writing per project.

Group Platform Typical voltage Typical capacity Status
Warehouse robot Light AGV / AMR (shelf-to-person, sorting, light transfer) 24V 18–50Ah Confirmed in writing per project
Warehouse robot Standard warehouse AGV / AMR (pallet, tugger, mid-load) 48V 30–105Ah Confirmed in writing per project
Warehouse robot 36V platform vehicles 36V Set per vehicle duty cycle Confirmed in writing per project
Warehouse robot Heavy-duty AGV (heavy pallet, outdoor transfer) 72V / 96V Custom Confirmed in writing per project
Interface Communication CAN / RS485 to vehicle controller — Protocol details confirmed per project
Interface Charging Plug-in or opportunity charging via dock contacts — Charge method and rate confirmed per project

Two points decide most AGV pack projects, and both belong in the first message you send us. The first is the discharge profile: an AMR that accelerates a full pallet every ninety seconds stresses a pack very differently from a sorting robot that runs light all shift, even at the same nominal voltage. The second is charging behaviour: a fleet that opportunity-charges at every idle window needs a pack and BMS specified for frequent partial charging, not a pack sized for one overnight charge.

What to Send Us for a Quotation

A useful AGV battery RFQ is a mechanical and electrical description of your vehicle. Send what you have from this list; the quotation confirms each item back to you in writing.

  • Battery bay drawing — maximum length × width × height, weight limit, mounting and connector position. A dimensioned sketch or CAD screenshot is enough to start.
  • Voltage platform — nominal voltage of the vehicle (24V, 36V, 48V, 72V/96V) and the voltage window your controller accepts.
  • Duty cycle — shifts per day, running hours, load carried, continuous and peak discharge current, and any regenerative braking the pack must absorb.
  • Charging method — plug-in or opportunity charging, dock or contact type, available charge time per stop, and the charge rate you expect.
  • Communication — protocol (CAN, RS485), the signals the vehicle needs from the BMS (state of charge, warnings, fault states), and any protocol documentation you can share.
  • Quantities and destination — sample quantity, expected fleet volume, and delivery destination, so the quotation can separate sample and batch terms.

Specifications, pricing and lead times are confirmed per project based on the information above. No figure on this page is a stock offer.

How a Project Runs

  1. Requirements review — you send the bay drawing and duty-cycle information above; we come back with the open questions that decide the design, not with a generic price.
  2. Written specification confirmation — cell configuration, pack dimensions and weight, discharge and charge limits, BMS functions and communication protocol are written into a specification both sides sign off before anything is built.
  3. Sample pack — a sample is produced to the confirmed specification for fit, connector and protocol validation in your vehicle.
  4. Batch production — fleet quantities are built to the same confirmed specification as the validated sample; any change after sample approval goes back through written confirmation.

Frequently Asked Questions

Do you sell a standard AGV battery I can order today?
No. AGV and AMR packs are project-built because the battery bay, discharge profile and charging interface differ by platform. The standard voltage platforms in the table above shorten the specification work, but the pack itself is confirmed and built per project.

Can you match the battery bay and connector of our existing robot?
That is the normal starting point for a retrofit. Send the bay drawing and connector details; the replacement pack’s dimensions, mounting and interface are fixed in the written specification before production.

Will the BMS communicate with our vehicle controller?
CAN and RS485 are the interfaces we coordinate most often. Which signals are exchanged, and the protocol details behind them, are confirmed per project in the written specification — share your controller’s protocol documentation with the RFQ if you can.

Can the pack support opportunity charging?
Opportunity charging is a specification item, not a label: it depends on the charge rate, the time available at each stop and the cell configuration selected. Tell us how your fleet charges and it will be addressed explicitly in the specification and quotation.

What documentation comes with the packs?
The documentation set for your order — for example the UN38.3 test summary and MSDS for the exact packs shipped, and the specification sheet — is confirmed per order in the quotation. We do not list certifications as page claims; what applies to your pack is stated in writing for your project.

Request a Quotation

Send your battery bay drawing, voltage platform, duty cycle and charging method via the inquiry form, and the reply will work through the checklist above item by item:

Request a warehouse AGV / AMR battery quotation · WhatsApp: +86 159 8945 0735