LiFePO4 storage for island solar systems on Pitcairn

Adamstown is home to about 40 people, the island supply is small and diesel-based, and every battery and spare arrives on a supply ship a few times a year. Anyone searching for LiFePO4 storage for island solar systems on Pitcairn needs the bank in kWh from measured essential watts × autonomy hours or days, not a design copied from Adamstown or sized from the array’s peak watts.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for isolated sites. We do not supply PV arrays, inverters, diesel sets or civil works, and we make no uptime guarantee.

Adamstown on Pitcairn, used to illustrate battery storage for one island facility.
Photo: Balou46, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a the Pitcairn Islands EPC sizing · WhatsApp +86 159 8945 0735

Example: an outer-island dispensary

LoadMeasured watts (example)Hours on battery
Community freezer (cycling)about 200 W average12 h
Lights, radio and communicationsabout 50 W12 h
Totalabout 2.4 + 0.6 ≈ 3 kWh per nightplus autonomy, losses and a reserve

Example only. Measure each load and its hours on site; the array’s peak watts are not the energy the bank must store.

What the EPC sends before a proposal

  • Measured essential watts and the hours each load runs.
  • Autonomy hours or days required.
  • System voltage, inverter and existing PV or diesel.
  • The island, the supply-ship schedule and handling limits at the landing.
  • Room temperature and ventilation at the site.

Prove one site, then repeat across islands

Programmes that prove one dispensary or school design and repeat it across islands simplify spares far from Adamstown. Prices and lead times only in a quotation.

Bounty Bay, where supplies are landed, used to illustrate sizing banks for an island served by ship.
Photo: Makemake at German Wikipedia, Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

Request an EPC bank sizing

Send the measured loads, autonomy and island. We reply with a kWh-based bank proposal for batteries only.

Send the site loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.