LiFePO4 storage for atoll solar systems in Tokelau

Fakaofo, Nukunonu and Atafu run on atoll solar-plus-storage systems built around 2012, with diesel kept as backup, and battery banks reach replacement age. Anyone searching for LiFePO4 storage for atoll solar systems in Tokelau needs the bank in kWh from measured essential watts × autonomy hours or days, not a design copied from Fakaofo or sized from the array’s peak watts.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for isolated sites. We do not supply PV arrays, inverters, diesel sets or civil works, and we make no uptime guarantee.

The village square on Fakaofo, used to illustrate battery storage for Tokelau's atoll solar systems.
Photo: CloudSurfer, Wikimedia Commons, CC BY 2.5 (resized, WebP). Illustration, not an LJY product.

Request a Tokelau EPC sizing · WhatsApp +86 159 8945 0735

Example: an outer-island dispensary

LoadMeasured watts (example)Hours on battery
Night-time village loadabout 12 kW average12 h
Clinic and freezersabout 3 kW12 h
Totalabout 144 + 36 ≈ 180 kWh per nightplus autonomy days, losses and a reserve

Example only. Measure each load and its hours on site; the array’s peak watts are not the energy the bank must store.

What the EPC sends before a proposal

  • Measured essential watts and the hours each load runs.
  • Autonomy hours or days required.
  • System voltage, inverter and existing PV or diesel.
  • The island, the ship schedule from Samoa and handling limits at the landing.
  • Room temperature and ventilation at the site.

Prove one site, then repeat across islands

Programmes that prove one dispensary or school design and repeat it across islands simplify spares far from Fakaofo. Prices and lead times only in a quotation.

A supply ship heading to Fakaofo, used to illustrate sizing banks for atolls served by sea.
Photo: Department of Foreign Affairs and Trade, Wikimedia Commons, CC BY 4.0 (resized, WebP). Illustration, not an LJY product.

Request an EPC bank sizing

Send the measured loads, autonomy and island. We reply with a kWh-based bank proposal for batteries only.

Send the site loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.