LiFePO4 backup battery for shops and clinics in Iraq

In Erbil, Baghdad and Basra, grid supply drops for hours a day in the summer peak, and shops switch between the grid, a neighbourhood generator line and their own small generator, losing refrigeration, tills and lights at each changeover. Anyone searching for a LiFePO4 backup battery in Iraq needs the bank in kWh from the measured essential watts × the outage hours, not from an ampere-hour label or a generator’s kVA. In summer heat, a shaded and ventilated spot for the bank keeps it within its operating temperature range.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory and we do not install. We coordinate 12.8V, 25.6V and 51.2V banks. The installer confirms the inverter, the mounting and the storm preparation on site.

A street in Erbil, used to illustrate LiFePO4 backup for shops and clinics in Iraq.
Photo: Adam Jones, Ph.D., Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

Request a Erbil, Baghdad and Basra backup sizing · WhatsApp +86 159 8945 0735

Example: essential loads of a small shop

LoadMeasured watts (example)Hours on battery
Fridge and freezer (cycling)about 250 W average6 h
Till, router and lightsabout 150 W6 h
Ceiling fansabout 120 W6 h
Totalabout 1.5 + 0.9 + 0.72 ≈ 3.1 kWhplus losses and a reserve

Example only. Measure the essential watts on site; a generator’s kVA or an inverter’s kW is not the energy the bank must store.

What the operator sends before a proposal

  • Measured watts of the essential loads, not nameplates.
  • Typical and longest outage hours.
  • System voltage and the inverter model (230 V 50 Hz).
  • Whether a genset stays as long-outage backup.
  • Where the bank is mounted and how the site is prepared for storms.

Size one site, then repeat it

Chains and installers who size one Erbil, Baghdad and Basra site from measured watts and then repeat the same bank avoid oversizing every shop. Prices and lead times only in a quotation.

A vendor near the Erbil citadel, used to illustrate sizing backup from measured loads.
Photo: Adam Jones, Ph.D., Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

Request a backup sizing

Send the measured essential loads and outage hours. We reply with a kWh-based bank proposal for batteries only.

Send the essential loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.