LiFePO4 storage for Camp settlements in the Falkland Islands

Farm settlements in Camp and on the outer islands run on their own wind turbines, solar and diesel with battery banks, and lead-acid banks reach replacement age. Anyone searching for LiFePO4 storage for Camp settlements in the Falkland Islands needs the bank in kWh from measured essential watts × autonomy hours or days, not a design copied from Stanley or sized from the array’s peak watts.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for isolated sites. We do not supply PV arrays, inverters, diesel sets or civil works, and we make no uptime guarantee.

Christ Church and the harbour in Stanley, used to illustrate battery storage for Falklands settlements.
Photo: amanderson2, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a the Falkland Islands EPC sizing · WhatsApp +86 159 8945 0735

Example: an outer-island dispensary

LoadMeasured watts (example)Hours on battery
Fridge and freezerabout 150 W average24 h
Lights, radio and routerabout 120 W8 h
Water pumpabout 300 W1 h
Totalabout 3.6 + 0.96 + 0.3 ≈ 4.9 kWh per dayplus losses and a reserve

Example only. Measure each load and its hours on site; the array’s peak watts are not the energy the bank must store.

What the EPC sends before a proposal

  • Measured essential watts and the hours each load runs.
  • Autonomy hours or days required.
  • System voltage, inverter and existing PV or diesel.
  • The island, the ship schedule and handling limits at the landing.
  • Room temperature and ventilation at the site.

Prove one site, then repeat across islands

Programmes that prove one dispensary or school design and repeat it across islands simplify spares far from Stanley. Prices and lead times only in a quotation.

Houses on the hillside in Stanley, used to illustrate sizing banks for Camp settlements.
Photo: amanderson2, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request an EPC bank sizing

Send the measured loads, autonomy and island. We reply with a kWh-based bank proposal for batteries only.

Send the site loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.