LiFePO4 backup battery for filling stations in South Africa

In Gauteng, the Free State, Limpopo and along the N1 and N3, filling stations that kept pumping through the load-shedding of 2022–2023 did it with generators and inverters, and many now want a battery that covers short outages without starting the generator. Anyone searching for a LiFePO4 backup battery for filling stations in South Africa needs the bank in kWh from measured watts × outage hours, not from the generator kVA or the inverter kW. Stations with a convenience shop and cold rooms agree which circuits are backed up; cold rooms usually stay on the generator.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks. We do not supply dispensers, POS terminals, pumps, canopies or fuel. The bank sits outside hazardous zones, and the enclosure, fusing and charge path are confirmed per station.

A filling station in Senekal, South Africa, used to illustrate LiFePO4 backup for forecourts.
Photo: Shell Senekal Filling Station, Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

Request a filling-station sizing · WhatsApp +86 159 8945 0735

Example: one urban station

LoadMeasured watts (example)Hours on battery
Four dispensers (in use)about 1.0 kW average2.5 h
POS, network and CCTVabout 300 W2.5 h
Canopy and shop lightsabout 800 W2.5 h
Totalabout 2.5 + 0.75 + 2.0 ≈ 5.25 kWhplus losses and a reserve

Example only. Measure the watts at the station; the generator kVA is not the energy the bank must store.

What the station sends before a proposal

  • Measured watts of dispensers, POS, canopy lights and office.
  • Typical and longest outage hours.
  • System voltage and inverter.
  • Existing generator and when it starts.
  • Battery location, outside hazardous zones.

One station, then the network

Chains that size one station from measured watts and repeat the bank across their network avoid oversizing every site. Prices and lead times only in a quotation.

A filling station in Pretoria at dusk, used to illustrate sizing a bank from measured watts.
Photo: JMK, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a station sizing

Send the measured watts and the outage hours. We reply with a kWh-based proposal for batteries only.

Send the station loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.