LiFePO4 backup battery for petrol stations in Kenya

Along the Mombasa–Nairobi highway, in towns such as Voi and Mtito Andei and across Nairobi, Kisumu and Nakuru, petrol stations stop dispensing and selling when the grid trips, and many start the generator even for short outages. Anyone searching for a LiFePO4 backup battery for petrol stations in Kenya needs the bank in kWh from measured watts × outage hours, not from the generator kVA or the inverter kW. Highway stations that also run a shop or café agree which circuits are backed up before sizing.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks. We do not supply dispensers, POS terminals, pumps, canopies or fuel. The bank sits outside hazardous zones, and the enclosure, fusing and charge path are confirmed per station.

A petrol station in Voi, Kenya, used to illustrate LiFePO4 backup for petrol stations.
Photo: Bahnfrend, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a filling-station sizing · WhatsApp +86 159 8945 0735

Example: one urban station

LoadMeasured watts (example)Hours on battery
Two dispensers (in use)about 600 W average3 h
POS, network and CCTVabout 250 W3 h
Canopy and shop lightsabout 500 W3 h
Totalabout 1.8 + 0.75 + 1.5 ≈ 4.05 kWhplus losses and a reserve

Example only. Measure the watts at the station; the generator kVA is not the energy the bank must store.

What the station sends before a proposal

  • Measured watts of dispensers, POS, canopy lights and office.
  • Typical and longest outage hours.
  • System voltage and inverter.
  • Existing generator and when it starts.
  • Battery location, outside hazardous zones.

One station, then the network

Chains that size one station from measured watts and repeat the bank across their network avoid oversizing every site. Prices and lead times only in a quotation.

A service station in Voi, used to illustrate sizing a bank from measured watts.
Photo: Bahnfrend, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a station sizing

Send the measured watts and the outage hours. We reply with a kWh-based proposal for batteries only.

Send the station loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.