LiFePO4 battery for water kiosks and RO units in Tanzania

In Dodoma, Mwanza and peri-urban Dar es Salaam, water kiosks, boreholes with booster pumps and small RO units sell water by the bucket, and the power rationing of 2023–2024 showed how an outage stops the pump while people queue. Anyone searching for a LiFePO4 battery for water kiosks and RO units in Tanzania needs the bank sized in kWh from measured watts × the hours the station must keep producing or selling on battery, not from a pump’s nameplate kW or a copied ampere-hour label. The borehole or booster pump sets the kWh; the dispenser draws little but stays on all day.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for the electrical load of a water station. We do not supply RO units, membranes, UV units, dispensers, filling machines or tanks, and we make no claim about water quality or litres per day; those belong to the equipment maker and the local authority.

A street in Dodoma, Tanzania, used to illustrate battery backup for water kiosks.
Photo: Mangapwani, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a water-station battery sizing · WhatsApp +86 159 8945 0735

Example: one small station

LoadMeasured watts (example)Hours on battery
Booster pumpabout 750 W4 h
Small RO unit (pump and controls)about 400 W4 h
UV unitabout 40 W4 h
Dispenser and token readerabout 30 W10 h
Totalabout 3.0 + 1.6 + 0.16 + 0.3 ≈ 5.1 kWhplus losses and a reserve

The figures are an example only. Measure your own equipment and the hours the station must run on battery; pump start current is confirmed with the inverter.

What the operator sends before a proposal

  • Measured watts of each pump, the UV unit and the dispenser or filling machine.
  • Hours per day on battery and the typical outage pattern.
  • System voltage (230 V 50 Hz) and the inverter model, including pump start current.
  • Whether a PV array or a genset is already on site.
  • Where the bank sits and the temperature there in the hot season.

Measure one station, then repeat the design

Operators with several Tanzanian outlets who measure one station and repeat the same bank spend less time on spares and training. Prices and lead times only in a quotation.

Mwanza on Lake Victoria, used to illustrate sizing a bank for water stations.
Photo: Gizmo Bunny, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a station battery sizing

Send the measured loads, the hours on battery and the inverter model. We reply with a kWh-based bank proposal for batteries only.

Send the measured loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.