LiFePO4 battery for water kiosks and water ATMs in Uganda

In Kampala settlements such as Bwaise and in Wakiso, Gulu and Mbarara, prepaid water dispensers, booster pumps and small RO/UV units serve customers who fetch water by the jerrycan, and an outage stops the dispenser and the pump while people queue. Anyone searching for a LiFePO4 battery for water kiosks and water ATMs in Uganda needs the bank sized in kWh from measured watts × the hours the station must keep producing or selling on battery, not from a pump’s nameplate kW or a copied ampere-hour label. The dispenser draws little but must stay on all day; the pump is what sets the kWh.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory. We coordinate 25.6V and 51.2V banks for the electrical load of a water station. We do not supply RO units, membranes, UV units, dispensers, filling machines or tanks, and we make no claim about water quality or litres per day; those belong to the equipment maker and the local authority.

A prepaid water dispenser in an informal settlement in Kampala, used to illustrate battery backup for water ATMs.
Photo: SuSanA Secretariat, Wikimedia Commons, CC BY 2.0 (resized, WebP). Illustration, not an LJY product.

Request a water-station battery sizing · WhatsApp +86 159 8945 0735

Example: one small station

LoadMeasured watts (example)Hours on battery
Booster pumpabout 550 W4 h
Small RO unit (pump and controls)about 400 W4 h
UV unitabout 40 W4 h
Prepaid dispenser and token readerabout 30 W10 h
Totalabout 2.2 + 1.6 + 0.16 + 0.3 ≈ 4.3 kWhplus losses and a reserve

The figures are an example only. Measure your own equipment and the hours the station must run on battery; pump start current is confirmed with the inverter.

What the operator sends before a proposal

  • Measured watts of each pump, the UV unit and the dispenser or filling machine.
  • Hours per day on battery and the typical outage pattern.
  • System voltage (240 V 50 Hz) and the inverter model, including pump start current.
  • Whether a PV array or a genset is already on site.
  • Where the bank sits and the temperature there in the hot season.

Measure one station, then repeat the design

Operators with several Ugandan outlets who measure one station and repeat the same bank spend less time on spares and training. Prices and lead times only in a quotation.

A street in Bwaise, Kampala, used to illustrate sizing a bank for water kiosks.
Photo: Raphyraphix ug, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a station battery sizing

Send the measured loads, the hours on battery and the inverter model. We reply with a kWh-based bank proposal for batteries only.

Send the measured loads

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.