Megarevo L1 (R3KL1–R6KL1): 40–58 V battery and CAN checklist

The L1 series (R3KL1 to R6KL1) is a single-phase low-voltage hybrid family. It is not the Megarevo split-phase 48 V family, and its battery-port facts must not be copied from those documents. Anyone searching for a Megarevo L1 R3KL1–R6KL1 40–58V CAN checklist needs the official voltage window, the 58 V maximum charge, the current by model and the CAN port, not a compatibility verdict inferred from a 51.2V name.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we do not claim to supply Megarevo products. This page quotes the official L1 product page only. A 51.2V name, or a window copied from a split-phase document, is not an approval. We do not publish a compatibility verdict. Protocol and the charge window are confirmed per inverter model and firmware.

Rooftop solar panels, used only as general context, not as a pairing claim with a Megarevo inverter
Photo: MassDOT, Wikimedia Commons, Public domain (resized, WebP). Illustration, not an LJY product.

Request a battery checklist for a Megarevo L1 job · WhatsApp +86 159 8945 0735

Facts taken from the official L1 product page

PointWhat the document statesThe installer still confirms
Voltage window40–58 V; Lithium or Lead-acid; maximum charging voltage 58 Vcharge end of the pack against this window
Current by modelmaximum charge/discharge R3KL1 95/62.2 A, R3K6L1 95/76.5 A, R4KL1 95/83.3 A, R4K6L1 95/95.8 A, R5KL1 95/104.2 A, R6KL1 95/110 Athe limit of this L1 model and of the pack
BMS portcommunication interface CANthe intended method, taken from the battery documentation
FamilyL1 R3KL1–R6KL1, not the split-phase 48 V familythe nameplate and the manual for this unit
Verdictnone is published on this pageprotocol and window confirmed per model and firmware

A 51.2V name, or a window copied from a split-phase document, is not an approval. The installer confirms the window, the current limit and the CAN port against this L1 model and the pack BMS.

What the installer sends before a proposal

  • L1 model (R3KL1 to R6KL1) and firmware version.
  • Pack voltage, series count and BMS.
  • The charge-voltage limit planned, against the 40–58 V window and the 58 V maximum.
  • Whether the cable is intended for the CAN interface.
  • Written confirmation from the battery supplier, if available.

Treat the L1 series as its own family

Installers who record the window, the current limit and the CAN port on a first L1 unit, rather than copying a split-phase document, avoid a silent mismatch after several roofs are already wired. Prices and lead times only in a quotation.

A school photovoltaic array, used only as general solar context, without any compatibility claim
Photo: Asurnipal, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

L1 model, pack data and port → checklist against the official product page → first test → later jobs. Prices and lead times only in the formal quote. We do not publish a compatibility verdict.

Send the L1 model and pack data and request a checklist

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.