LiFePO4 batteries for solar LED billboards in Kenya

On the Nairobi–Mombasa highway and on urban corridors in Nairobi, LED advertising faces often have to stay on all night, on stretches where the grid is weak or missing. Diesel sets and undersized batteries leave the face dark or keep a generator running until morning. Anyone searching for a LiFePO4 solar LED billboard battery in Kenya needs to turn the measured watts of the face and the controller, and the night hours, into kWh — not copy the array’s watt-peak or a neighbour’s ampere-hour figure. This page is about the bank behind an advertising face. It is not a municipal solar street-light page, not a solar CCTV or signal page, and not the Nigeria billboard page.

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen; we are not a factory, we do not make LED faces, unipoles or media structures, and we do not sell advertising slots. We coordinate 12.8V, 25.6V and 51.2V banks, with a heated option where charging may fall below 0 °C. Enclosure, fusing and theft protection are confirmed per site. We do not publish guaranteed fuel-hour or brightness claims.

The Nairobi–Mombasa highway near JKIA, a corridor where outdoor advertising faces run through the night
Photo: Endesia94, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a bank proposal for solar LED billboards in Kenya · WhatsApp +86 159 8945 0735

What the media owner defines per face

PointWhy it mattersConfirmed per project
51.2V wall-mountedhigher-power faces and controllerskWh and module count
25.6Vmedium faces on a 24V classampere-hours and cabinet space
12.8Vsmaller faces or controller-only loadsampere-hours and autonomy days
Night hours and autonomyhow long the face must stay onmeasured hours, plus reserve days
Face, structure, media slotnot part of the kWh calculationLJY does not supply them

The arithmetic is only a method: an 800 W face plus a 50 W controller for 12 hours asks for about 10.2 kWh, plus losses and one or two days of reserve. A night of measured watts on that face is worth more than the array’s watt-peak or a copied ampere-hour label.

What the operator sends before a proposal

  • Measured average watts of the face and the controller, not only the panel watt-peak.
  • Typical night hours and how many autonomy days the site requires.
  • System voltage and the space in the cabinet or the base.
  • Theft, heat and whether charging may fall below 0 °C.
  • Whether the face is already on a diesel set that should stay as a backup only.

Prove one face on a corridor, then repeat the bank

Operators who instrument one face on the Nairobi–Mombasa corridor, with real night hours, and then freeze the module count, can roll the same bank out along the route without guessing. Prices and lead times only in a quotation.

The Nairobi Expressway, used as context for urban and highway advertising sites, not as a product image
Photo: Bahnfrend, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Measured face load and night hours → bank proposal → first face → later sites. Prices, quantities and lead times only in the formal offer.

Send the face load and night hours and request a proposal

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.