The Deye SUN-5/6/8/10/12K-SG04LP3-EU is a three-phase low-voltage hybrid inverter used with 48V-class batteries on larger homes and small commercial roofs. Installers who already know the single-phase SG03LP1 sometimes copy its Lithium Mode number and hope the 40–60 V window (60 V confirmed per project) will accept any 51.2V pack. Anyone searching for a Deye SG04LP3 40–60 V CAN or RS485 checklist needs this family’s own documents, not a setting borrowed from the single-phase unit.
LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we make no claim about Deye products. The official SG04LP3-EU product page describes a lead-acid or lithium-ion battery, a 40–60 V window (any 60 V figure is confirmed per project), maximum charge and discharge currents of 120, 150, 190, 210 or 240 A according to the 5, 6, 8, 10 or 12 kW model, a Li-ion charging strategy of self-adaptation to the BMS, and one battery input. The user manual lists RS232, RS485 and CAN among the communication interfaces. Public datasheets for the same family also list communication with the BMS as RS485 and CAN. This three-phase family is distinct from the single-phase SUN-SG03LP1-EU. As on that list, the purchaser should confirm compatibility with the battery supplier. We do not treat a 51.2V pack as approved because it sits somewhere in the 40–60 V window (60 V confirmed per project).

Request a battery checklist for a Deye SG04LP3 job · WhatsApp +86 159 8945 0735
What the SG04LP3 documents say
| Point | Public source | What to confirm per project |
|---|---|---|
| Voltage window | 40–60 V; any 60 V figure confirmed per project | charge end of the pack against this window |
| Current | 120 / 150 / 190 / 210 / 240 A by 5–12 kW model | pack and inverter limits actually used |
| Li-ion charging | self-adaptation to the BMS | that BMS values appear on the unit |
| Ports | RS485 and CAN (manual also lists RS232) | which port the pack and cable actually use |
| Family | three-phase SG04LP3, distinct from single-phase SG03LP1 | model and firmware on the nameplate |
A Lithium Mode number copied from an SG03LP1, or a voltage name on a pack, is not an approval. The 40–60 V window, and any 60 V figure, is confirmed per project. The installer confirms the window and the protocol against this model’s firmware and the pack BMS.
What the installer sends before a proposal
- Deye SUN-SG04LP3-EU model (5K to 12K) and firmware version.
- Pack voltage, series count and BMS.
- The charge-voltage limit planned, against the 40–60 V window (60 V confirmed per project).
- Whether the cable is intended for RS485 or CAN.
- Written confirmation from the battery supplier, if available.
Treat the three-phase unit as its own family
Installers who record the window and the communication on a first SG04LP3 unit, rather than copying a single-phase setting, avoid a silent mismatch after several commercial roofs are already wired. Prices and lead times only in a quotation.

How we proceed
SG04LP3 model, pack data and port → checklist against the product page and manual → first test → later jobs. Prices and lead times only in the formal quote. We do not publish a compatibility verdict.
Send the SG04LP3 model and pack data and request a checklist
LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.
