Bajaj battery swap packs for Ethiopian networks

Three-wheelers, the familiar bajaj, carry a large share of short trips in Addis Ababa, Adama and Dire Dawa, and electric versions are arriving from several makers. A swap network only works if one pack fits all of them and every cabinet. Addis Ababa’s altitude brings cool nights, while Dire Dawa is hot. Anyone searching for a bajaj battery swap pack for an Ethiopian network needs one written specification, not a pack chosen by a 48V or 60V name (60V and 72V supply confirmed per project).

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we do not supply cabinets, vehicles or chargers or run a network. We coordinate 51.2V 16S packs as the 48V-class reference. Any 60V or 72V pack is confirmed per project. The series count, charge cut-off, connector, mechanical size, BMS-to-cabinet protocol and the charging behaviour on cool nights are written down before an Ethiopian pilot station opens.

Three bajaj three-wheelers in Dire Dawa, Ethiopia
Photo: Qchasserieau, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a swap-pack quote for an Ethiopian network · WhatsApp +86 159 8945 0735

What the network locks in first

ItemWhy it mattersConfirmed per project
Series countvehicles from several makers may assume different series countscells in series, from the datasheet
Charge cut-offeach cabinet charger must stop where the BMS stopscharge voltage and current
Connector and sizethe pack must enter every cabinet and every vehicledrawing and lock
BMS-to-cabinet protocolthe cabinet must recognise the packCAN or other link, in writing
Altitude and heatcool nights in Addis Ababa, heat in Dire Dawacharge temperature limits per site

A voltage name is not a swap specification. Two importers that both say 48V or 60V can still use different series counts; 60V and 72V supply is confirmed per project.

Nominal voltage, charge cut-off, series count and BMS

A 48V, 60V or 72V nameplate (60V and 72V supply confirmed per project) does not say how many cells are in series or where a cabinet charger must stop. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from Battery University charge limits. Every 60V or 72V pack is confirmed per project.

Chemistry and seriesNominalCharge cut-offBMS configuration
LiFePO4 16S (3.2V / 3.65V per cell)51.2V58.4V16S board
LiFePO4 20S64.0V73.0V20S board
LiFePO4 24S76.8V87.6V24S board
NMC 16S (3.6V / 4.2V per cell)57.6V67.2V16S board, NMC limits
NMC 20S72.0V84.0V20S board, NMC limits
Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell)60V69.0–73.5Vno BMS; LiFePO4 replacement confirmed per project
Lead-acid 72V (6 × 12V, 36 cells)72V82.8–88.2Vno BMS; LiFePO4 replacement confirmed per project

A 72V lead-acid set charges up to about 88.2V, while a 24S LiFePO4 pack stops at 87.6V, so 72V supply is confirmed per project and the cabinet charger is set to the pack, not the name. A 20S BMS cannot protect a 24S pack. We never infer compatibility from a voltage name.

What the network sends before a quote

  • Vehicle makes and models, and the cabinet vendors shortlisted.
  • Connector, pack size and how the pack locks into the vehicle.
  • Cabinet charger model and protocol.
  • Swaps per pack per day, altitude and lowest night temperature per station.
  • UN38.3 and SDS come with the quote; we do not run the network.

Pilot in Addis Ababa and in a hot city

Networks that pilot one pack family at a station in Addis Ababa and another in Adama or Dire Dawa learn both the cool-night and the hot-day behaviour before they freeze the specification. Prices and lead times only in a quotation.

A bajaj three-wheeler in Adama, Ethiopia, the vehicle type a swap pack has to fit
Photo: Gyrofrog, Wikimedia Commons, CC BY-SA 3.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Vehicle, cabinet and protocol data → pack specification → two-city pilot → network orders. Prices and lead times only in the formal quote.

Send your vehicle and cabinet data and request a specification

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.