Boda battery swap packs for Kampala operators

Kampala’s boda-bodas are moving to electric motorcycles, and several operators run swap stations where a rider drops a flat pack and takes a full one. When motorcycles and cabinets come from different suppliers, a pack that seats in one station refuses the next, and heavy rain and potholes punish connectors. Anyone searching for a boda battery swap pack for a Kampala network needs one written specification, not a pack chosen by a 48V or 60V name (60V and 72V supply confirmed per project).

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we do not supply cabinets, motorcycles or chargers or run a network. We coordinate 51.2V 16S packs as the 48V-class reference. Any 60V or 72V pack is confirmed per project. The series count, charge cut-off, connector, mechanical size and BMS-to-cabinet protocol are written down before a pilot station opens in Kampala.

Motorcycles in a busy Kampala street, where boda-boda swap networks operate
Photo: ObbyK, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a swap-pack quote for a Kampala network · WhatsApp +86 159 8945 0735

What the operator locks in first

ItemWhy it mattersConfirmed per project
Series countcabinets from two vendors may assume different series countscells in series, from the datasheet
Charge cut-offeach cabinet charger must stop where the BMS stopscharge voltage and current
Connector and sizethe pack must enter every cabinet and every framedrawing and lock
BMS-to-cabinet protocolthe station must recognise the packCAN or other link, in writing
Rain and shockwet seasons and potholed roadssealing, connector and cycle

A voltage name is not a swap specification. Two operators that both say 48V or 60V can still use different series counts; 60V and 72V supply is confirmed per project.

Nominal voltage, charge cut-off, series count and BMS

A 48V, 60V or 72V nameplate (60V and 72V supply confirmed per project) does not say how many cells are in series or where a cabinet charger must stop. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from Battery University charge limits. Every 60V or 72V pack is confirmed per project.

Chemistry and seriesNominalCharge cut-offBMS configuration
LiFePO4 16S (3.2V / 3.65V per cell)51.2V58.4V16S board
LiFePO4 20S64.0V73.0V20S board
LiFePO4 24S76.8V87.6V24S board
NMC 16S (3.6V / 4.2V per cell)57.6V67.2V16S board, NMC limits
NMC 20S72.0V84.0V20S board, NMC limits
Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell)60V69.0–73.5Vno BMS; LiFePO4 replacement confirmed per project
Lead-acid 72V (6 × 12V, 36 cells)72V82.8–88.2Vno BMS; LiFePO4 replacement confirmed per project

A 60V lead-acid set charges up to about 73.5V, while a 20S LiFePO4 pack stops at 73.0V, so 60V supply is confirmed per project and each station charger is set to the pack, not the name. A 16S BMS cannot protect a 20S pack. We never infer compatibility from a voltage name.

What the operator sends before a quote

  • Motorcycle models and the cabinet vendors already in the network.
  • Connector, pack size and how the pack locks into the frame.
  • Cabinet charger model and the protocol each vendor uses.
  • Swaps per pack per day and the number of stations in the pilot.
  • UN38.3 and SDS come with the quote; we do not run the network.

Pilot one station, then freeze the pack

Operators who run one pack family at a single Kampala station through a rainy season, then freeze the specification, avoid mixing connectors when stations open in Entebbe or Mukono. Prices and lead times only in a quotation.

A boda-boda with a passenger in Uganda, the daily duty cycle a swap pack must handle
Photo: Mutegekicliff, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Motorcycle, cabinet and protocol data → pack specification → station pilot → network orders. Prices and lead times only in the formal quote.

Send your motorcycle and cabinet data and request a specification

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.