E-trike battery swap packs for Philippine LGU programmes

Many Philippine cities now run e-trike programmes in which a driver should be able to swap a pack at any cabinet in the network. Vehicles and cabinets often come from different suppliers, and a pack that seats in one cabinet will not seat in the next. Anyone searching for an e-trike battery swap pack for a Philippine LGU programme needs one written specification, not a pack chosen only by a 48V or 60V name (60V and 72V supply confirmed per project).

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we do not supply cabinets, vehicles or chargers or run a programme. We coordinate 51.2V 16S packs as the 48V-class reference. Any 60V or 72V pack is confirmed per project. The series count, charge cut-off, connector, mechanical size and the BMS-to-cabinet protocol are written down before a pilot terminal is opened.

An e-trike in a Philippine city street, of the type used in local-government fleets
Photo: RoyKabanlit, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a swap-pack quote for a Philippine LGU programme · WhatsApp +86 159 8945 0735

What the programme locks in first

ItemWhy it mattersConfirmed per project
Series countcabinets from two vendors may assume different series countscells in series, from the datasheet
Charge cut-offeach cabinet charger must stop where the BMS stopscharge voltage and current
Connector and sizethe pack must enter every cabinet and every e-trike in the programmedrawing and lock
BMS-to-cabinet protocolthe cabinet has to recognise the packCAN or other link, in writing
Humidity and handlingtyphoon-season air and busy terminalsenclosure and cycle

A voltage name is not a swap specification. Two LGU tenders that both say 48V or 60V can still describe different series counts; 60V and 72V supply is confirmed per project.

Nominal voltage, charge cut-off, series count and BMS

A 48V, 60V or 72V nameplate (60V and 72V supply confirmed per project) does not say how many cells are in series or where a cabinet charger must stop. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from Battery University charge limits. Every 60V or 72V pack is confirmed per project.

Chemistry and seriesNominalCharge cut-offBMS configuration
LiFePO4 16S (3.2V / 3.65V per cell)51.2V58.4V16S board
LiFePO4 20S64.0V73.0V20S board
LiFePO4 24S76.8V87.6V24S board
NMC 16S (3.6V / 4.2V per cell)57.6V67.2V16S board, NMC limits
NMC 20S72.0V84.0V20S board, NMC limits
Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell)60V69.0–73.5Vno BMS; LiFePO4 replacement confirmed per project
Lead-acid 72V (6 × 12V, 36 cells)72V82.8–88.2Vno BMS; LiFePO4 replacement confirmed per project

A 60V lead-acid set charges up to about 73.5V, while a 20S LiFePO4 pack stops at 73.0V, so 60V supply is confirmed per project and the cabinet charger is set to the pack, not the name. A 16S BMS cannot protect a 20S pack. We never infer compatibility from a voltage name.

What the programme office sends before a quote

  • E-trike models and the cabinet vendors already awarded or shortlisted.
  • Connector, pack size and how the pack is locked in the vehicle.
  • Cabinet charger model and the communication protocol each vendor uses.
  • Expected swaps per pack per day, and the number of terminals in the pilot.
  • UN38.3 and SDS come with the quote; we do not run the programme.

Pilot one terminal, then freeze the pack

Programmes that run one pack family at a single Davao or Iloilo terminal, then freeze the specification, avoid mixing connectors when the next city joins. Prices and lead times only in a quotation.

An e-trike at a stop in Metro Manila
Photo: Ganmatthew, Wikimedia Commons, CC BY 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Vehicle, cabinet and protocol data → pack specification → terminal pilot → programme orders. Prices and lead times only in the formal quote.

Send your vehicle and cabinet data and request a specification

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.