Okada and keke battery swap packs for Nigerian networks

Electric okada and keke napep trials in Lagos, Ibadan and Abuja only work if a rider can swap a pack at more than one cabinet. Vehicles and cabinets often come from different vendors, roads are rough and the heat is high. Anyone searching for an okada or keke battery swap pack in Nigeria needs one written pack specification for the whole network, not a pack chosen only by a 48V, 60V or 72V name (60V and 72V supply confirmed per project).

LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory, and we do not supply cabinets, vehicles or chargers or operate a network. We coordinate 51.2V 16S packs as the 48V-class reference. Any 60V or 72V pack is confirmed per project. The series count, charge cut-off, connector, mechanical size and the BMS-to-cabinet protocol are written down before a pilot.

A commercial keke napep tricycle in traffic in Lagos, Nigeria
Photo: Jamie Tubers, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

Request a swap-pack quote for a Nigerian network · WhatsApp +86 159 8945 0735

What the operator locks in first

ItemWhy it mattersConfirmed per project
Series counta 16S pack is not a 20S pack, even if both are called 60V-classcells in series, from the datasheet
Charge cut-offthe cabinet charger must stop where the BMS stopscharge voltage and current
Connector and sizethe pack must enter every cabinet and every vehicle in the networkdrawing and lock
BMS-to-cabinet protocolthe cabinet has to recognise the packCAN or other link, in writing
Daily swaps and heatLagos and Ibadan heat, rough roadscycle and enclosure

A voltage name is not a swap specification. Two packs that share a 60V name can still differ in series count and charge window; 60V and 72V supply is confirmed per project.

Nominal voltage, charge cut-off, series count and BMS

A 48V, 60V or 72V nameplate (60V and 72V supply confirmed per project) does not say how many cells are in series or where a cabinet charger must stop. The table multiplies public per-cell values by the series count: LiFePO4 from the EVE LF304 datasheet, NMC from the Samsung SDI 18650-25R datasheet, and lead-acid from Battery University charge limits. Every 60V or 72V pack is confirmed per project.

Chemistry and seriesNominalCharge cut-offBMS configuration
LiFePO4 16S (3.2V / 3.65V per cell)51.2V58.4V16S board
LiFePO4 20S64.0V73.0V20S board
LiFePO4 24S76.8V87.6V24S board
NMC 16S (3.6V / 4.2V per cell)57.6V67.2V16S board, NMC limits
NMC 20S72.0V84.0V20S board, NMC limits
Lead-acid 60V (5 × 12V, 30 cells, 2.30–2.45V per cell)60V69.0–73.5Vno BMS; LiFePO4 replacement confirmed per project
Lead-acid 72V (6 × 12V, 36 cells)72V82.8–88.2Vno BMS; LiFePO4 replacement confirmed per project

A 60V lead-acid set charges up to about 73.5V, while a 20S LiFePO4 pack stops at 73.0V, so 60V supply is confirmed per project and the cabinet charger is set to the pack, not the name. A 16S BMS cannot protect a 20S pack. We never infer compatibility from a voltage name.

What the operator sends before a quote

  • Vehicle models and the cabinets already chosen or planned.
  • Connector, pack size and how the pack is locked in the vehicle.
  • Cabinet charger model and the communication protocol it expects.
  • Expected swaps per pack per day, and the number of cabinets in the pilot.
  • UN38.3 and SDS come with the quote; we do not operate the network.

Pilot one corridor, then freeze the pack

Operators who run one pack family on a short Lagos or Ibadan corridor, then freeze the specification, avoid mixing connectors and chargers when the network grows. Prices and lead times only in a quotation.

A commercial tricycle in Ajah, Lagos, of the type now entering electrification trials
Photo: Gbolawa, Wikimedia Commons, CC BY-SA 4.0 (resized, WebP). Illustration, not an LJY product.

How we proceed

Vehicle, cabinet and protocol data → pack specification → corridor pilot → network orders. Prices and lead times only in the formal quote.

Send your vehicle and cabinet data and request a specification

LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.