24V LiFePO4 Pallet Truck & Walkie Stacker Battery Series (105–300Ah)

LJY-24V-PT-SERIES 24V 105-300Ah LiFePO4 pallet truck and walkie stacker battery series, front view, white background — Appearance, color and logo customizable per customer request.

Product Overview

An OEM/ODM series of 25.6V (24V class) LiFePO4 batteries for electric pallet trucks, pallet jacks, walkie stackers and order pickers — the most common lithium replacement in warehouse fleets. Dealers and fleet service companies re-order the same few capacities truck model by truck model.

This page is the product series for pallet-truck formats. For broader material-handling background read the 24V material-handling guide; for generic 24V models see the 24V LiFePO4 series; for larger trucks see the 48V and 80V forklift series; for robots see AGV/AMR batteries.

Appearance, color and logo customizable per customer request.

Request a Quote

WhatsApp: +1 404 784 1946 (backup: +86 159 8945 0735)

Series ladder: 105 / 150 / 205 / 300Ah (24V class)

Energy = nominal voltage × Ah. Reference configurations only — not measured results.

Capacity	8S energy (25.6V × Ah)	Typical use class (industry reference)
105Ah	2.688kWh	Light-duty pallet jacks, small stackers
150Ah	3.84kWh	Electric pallet trucks, walkie stackers
205Ah	5.248kWh	Heavy pallet trucks, order pickers
300Ah	7.68kWh	Tow tractors, long-shift stackers

Specifications

How to read Status — three classes: [Industry reference] = standard reference parameter common to this product class (not an LJY test result). [Optional configuration] = configurable per OEM/ODM project (BMS communication, parallel/series setup, heating, enclosure, logo). [Confirmed per project] = fixed only in the datasheet issued with your quotation. Arithmetic: energy = nominal voltage × Ah.

Group	Parameter	Value	Status
Electrical	Voltage class	25.6V nominal (8S), 24V class	[Industry reference]
Electrical	Capacity ladder	105 / 150 / 205 / 300Ah (see series table)	[Industry reference]
Electrical	Energy check	25.6V × Ah (e.g. 150Ah = 3.84kWh, 205Ah = 5.248kWh)	[Industry reference] — arithmetic
Electrical	Continuous / peak discharge	Sized to the truck controller (start-stop duty)	[Confirmed per project]
BMS	Protections	Over-charge/discharge, over-current, short-circuit, temperature, balancing	[Industry reference]
BMS	Communication	CAN to truck, RS485 to display/charger — per project	[Optional configuration]
BMS	Telematics / SOC display	Bluetooth, 4G, display	[Optional configuration]
Thermal	Self-heating (cold store)	Available on request	[Optional configuration]
Mechanical	Tray dimensions / weight	Matched to the truck compartment (BCI/DIN tray reference)	[Confirmed per project]
Mechanical	Connectors / enclosure	REMA / Anderson-type; steel case; ballast if required	[Optional configuration]
Cells	Cell brand / traceability	Stated per order	[Confirmed per project]
Commercial	Certificates / MOQ / lead time / warranty	Per model and order	[Confirmed per project]

Optional configurations (OEM/ODM)

LJY Energy supplies this model as an OEM/ODM configurable build. The items below are configured per customer project — they are not fixed catalog defaults.

Capacity: 105 / 150 / 205 / 300Ah or custom Ah to fit a tray.
Communication: CAN / RS485 protocol set to the truck and charger.
Connectors and case: REMA / Anderson-type, steel enclosure, ballast.
Self-heating for cold-store use — available on request.
Branding: Appearance, color and logo customizable per customer request.

BMS, communication & protection

Pallet trucks run frequent start-stop duty with short peaks, and often opportunity-charge on breaks. The BMS and charger must be matched to the truck.

BMS sizing guide

Load / use case	Suggested BMS rating
Single-shift pallet jack	BMS sized to controller peak; standard charger
Multi-shift with opportunity charging	Higher charge current and charger CAN per project
Cold store	Self-heating option

Send truck brand/model, existing battery tray size and weight, connector type and charger model.

Size, handling & fitment

Tray size and minimum weight come from the truck; lithium is lighter than lead-acid, so ballast may be needed. Final dimensions are fixed in the project drawing.

24V pallet trucks are not interchangeable with 36V/48V trucks.

Applications

Electric pallet trucks and pallet jacks
Walkie stackers and order pickers
Tow tractors and light-duty trucks
Dealer replacement SKUs and rental fleets

Application limits

Truck-specific fit — no universal drop-in claim.
Charger must use a LiFePO4 profile.
Truck OEM approvals are not claimed.

OEM / ODM & wholesale

LJY Energy is a China-based LiFePO4 battery supplier and OEM/ODM solutions provider offering customization, project-confirmed specifications and export supply coordination. Appearance, color and logo customizable per customer request. Certificate and documentation scope (e.g. UN38.3 / MSDS for shipping) is confirmed per model, order and target market — request the current document package. See the product catalog and wholesale & distributor program.

What to include in your inquiry

Truck brand/model and controller
Existing tray dimensions, minimum weight and connector
Charger model; shifts per day
Climate (cold store / ambient)
Annual volume
Logo / appearance / packaging needs
Target market (documentation scope)

Request a Quote

WhatsApp: +1 404 784 1946 (backup: +86 159 8945 0735)

Frequently Asked Questions

Is 24V really 25.6V?

Yes. 8S LiFePO4 is 25.6V nominal and is sold as 24V class.

Is it a drop-in replacement?

Only after tray size, weight, connectors and charger are confirmed for your truck model.

How is MOQ set?

MOQ is confirmed per project stage (sample, pilot, production).

Which certificates apply?

Scope is confirmed per model, order and target market; none are claimed on this page.

Values marked [To confirm] or [Competitor public] are not LJY-verified defaults. Product images are product renders for illustration. Content as of October 2026.