Many 16S 51.2V storage packs were designed around 280Ah prismatic cells such as the EVE LF280K. The newer 314Ah generation, published by several Chinese cell makers, is now the common request in quotes. A pack assembler searching for a 280Ah to 314Ah cell upgrade in a 16S pack wants to know whether the existing enclosure, BMS and busbars still fit, and which checks to repeat before the first production lot.
LJY Energy is a LiFePO4 supplier and OEM/ODM coordinator in Shenzhen, not a factory. This page uses public datasheets only. The cell brand and lot for any LJY order are confirmed in the quotation; we do not claim to stock or supply any specific third-party cell model unless the order confirms it. Public data show the EVE LF280K and EVE MB31 share a 71173207-class housing, but a common housing does not by itself make two cells interchangeable in your design.

Request a quote for 314Ah cells or packs · WhatsApp +86 159 8945 0735
What public datasheets show
| Cell (public data) | Rated capacity / energy | What it means for a 16S pack |
|---|---|---|
| EVE LF280K | 280Ah, 896Wh, 3.2V | about 14.3 kWh nominal per 16S string |
| EVE MB31 | 314Ah, 1004.8Wh, 3.2V | about 16.1 kWh nominal per 16S string |
| CATL CBC00, Hithium LFP71173207, REPT Wending | 314Ah class (makers’ public pages) | same nominal class; check each maker’s dimensions and conditions |
| LJY 51.2V 314Ah pack | 16.08 kWh class | cell brand and lot confirmed per order |
Rated capacity is specified under each maker’s own test conditions in its datasheet. Compare those conditions, not only the Ah figure; anything not stated in a datasheet must be confirmed by datasheet review or your own tests.
What to re-check before switching
- BMS continuous and peak current rating against the higher capacity and your charge/discharge rate.
- Busbar cross-section, terminal type and torque per the new cell’s datasheet.
- Compression fixture and enclosure clearance, since dimensions differ slightly between makers.
- Charger and inverter limits for the larger pack energy.
- UN38.3 and SDS must cover the exact cell and pack shipped; these documents follow the confirmed order.
One validation lot before the product line
Assemblers usually build one validation lot with the new cells, repeat their own capacity and internal-resistance checks, then roll the change across the range. Prices and lead times only in a quotation.

How we proceed
Current design, BMS rating, enclosure and target energy → proposal stating the cell brand and lot → validation lot → series orders. Prices and lead times only in the formal quote.
Send your 16S design and request a cell quote
LJY Energy, Jack Lai. Unit 705, Building 1, Lecai Industrial Park, 10 Kaijing Road, Longtian Street, Pingshan District, Shenzhen 518122, China. +86 159 8945 0735.
